SDS_AQUAFIN-InjectPro-61-Accelerator_021519.pdf
5 Pages
223 KB
Download
<h1>SDS_AQUAFIN-InjectPro-61-Accelerator_021519.pdf</h1> <p>IDENTITY:</p> <p>SAFETY DATA SHEET</p> <p>InjectPro-Accelerator</p> <p>Date prepared: <br />Date revised:</p> <p>SDS No. IPA.1</p> <p>MARCH 2013 <br />FEBRUARY 2019</p> <p>SDS No. IPA.1</p> <p>Section 1 – Product Identification <br />IDENTITY:</p> <p>Product Name: <br />Product Use Description:</p> <p>InjectPro-61-Accelerator</p> <p>Accelerator for Hydrophobic flexible Polyurethane Injection Grout</p> <p>AQUAFIN, INC. <br />505 BLUE BALL RD. #160 <br />ELKTON, MD 21921</p> <p>24 hr Emergency Phone: Chem-Tel (800) 255-3924</p> <p>Recommended use of the chemical and restriction on use:</p> <p>Refer to the product technical data sheet. <br />For industrial and professional users.</p> <p>Information Phone No.</p> <p>(410) 392-2300</p> <p>www.aquafin.net info@aquafin.net</p> <p>Section 2 – Hazards Identification <br />GHS Classification: <br />Skin corrosion, Category 1B <br />Skin sensitization, Category 1 <br />Respiratory tract irritation, Category 3 <br />Gem cell mutagenicity, Category 2 <br />Reproductive toxicity, Category 1B <br />Target organ toxicity, repeated exposure, Category 1</p> <p>= H314. <br />= H317. <br />= H335. <br />= H341. <br />= H360. <br />= H372.</p> <p>GHS Label element: <br />Hazard Pictograms <br />GHS05</p> <p>GHS07</p> <p>GHS08</p> <p>Signal Word:</p> <p>Danger</p> <p>Hazard Statements: <br />H314: <br />H317: <br />H335: <br />H341: <br />H360: <br />H372:</p> <p>Causes severe skin burns and eye damage. <br />May cause an allergic skin reaction. <br />May cause respiratory irritation. <br />Suspected of causing genetic defects. <br />May damage fertility or the unborn child. <br />Causes damage to organs through prolonged or repeated exposure if swallowed.</p> <p>Precautionary Statements: <br />Prevention: <br />P102: <br />Keep out of reach of children. <br />P202: <br />Do not handle until all safety precautions have been read and understood. <br />P260: <br />Do not breathe mist, vapors or spray. <br />P264: <br />Wash skin thoroughly after handling. <br />P270: <br />Do not eat, drink or smoke when using this product. <br />P271: <br />Use only outdoors or in a well-ventilated area. <br />P280: <br />Wear protective gloves/protective clothing/eye protection/face protection. <br />Response: <br />P301 + P330 + P331: <br />P310: <br />P303 + P353 + P361:</p> <p>IF SWALLOWED: rinse mouth. Do NOT induce vomiting. <br />Immediately call a POISON CENTER or Physician. <br />IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with <br />Page 1 of 5</p> <p>IDENTITY:</p> <p>SAFETY DATA SHEET</p> <p>InjectPro-Accelerator</p> <p>SDS No. IPA.1</p> <p>P308 + P313:</p> <p>water or shower. <br />Wash contaminated clothing before reuse. <br />IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable <br />for breathing. <br />Get medical advice if you feel unwell. <br />If experiencing respiratory symptoms: call a POISON CENTER or <br />physician. <br />IF IN EYES: <br />Rinse cautiously with water for several minutes. Remove contact <br />lenses, if present and easy to do. Continue rinsing. <br />IF exposed or concerned, get medical advice.</p> <p>Storage: <br />P403 + P410: <br />P405:</p> <p>Store in a well-ventilated place. Protect from sunlight. <br />Store locked up.</p> <p>Disposal: <br />P501:</p> <p>Dispose of contents/container to an approved waste disposal site.</p> <p>P363: <br />P304 + P340: <br />P314: <br />P342 + P311: <br />P305 + P351 + P338:</p> <p>Section 3 – Composition / Information on Hazardous Ingredients <br />Component: <br />Tertiary amines <br />Tin mercaptide</p> <p>CAS No. <br />Trade Secret <br />Trade Secrete</p> <p>% (Weight) <br />5 - 20 <br />≤5</p> <p>Note: There are no additional ingredients present which, within the current knowledge of the supplier and in the <br />concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in <br />this section.</p> <p>Section 4 – First Aid Measures <br />Inhalation:</p> <p>Supply fresh air and consult a physician if breathing becomes difficult.</p> <p>Ingestion:</p> <p>If person is conscious, wash out mouth with water. Do not induce vomiting unless <br />instructed to do so by a poison center or physician. Consult a physician.</p> <p>Skin Contact:</p> <p>Immediately flush skin with plenty of water. Do not use solvents or thinners. Remove <br />contaminated clothing and shoes. Seek medical advice if irritation or rash occurs. Wash <br />clothing before reuse.</p> <p>Eye Contact:</p> <p>Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower <br />eyelids occasionally. Remove contact lenses, if present. Seek medical attention.</p> <p>Section 5 – Fire Fighting Measures <br />Extinguishing Media:</p> <p>Water fog, foam, dry chemical or carbon dioxide.</p> <p>Fire Fighting Procedures:</p> <p>Standard. As in any fire, wear self-contained breathing apparatus <br />pressure-demand, MSHA/NIOSH (approved or equivalent) and full <br />protective gear. Containers can build up pressure if exposed to heat <br />(fire). Cool with water spray. Do not scatter material with high pressure <br />water streams.</p> <p>Hazardous Combustion Products:</p> <p>Carbon oxides, nitrogen oxides, ammonia, aldehydes and tin oxide.</p> <p>Explosion Hazards:</p> <p>None. <br />Page 2 of 5</p> <p>IDENTITY:</p> <p>SAFETY DATA SHEET</p> <p>InjectPro-Accelerator</p> <p>SDS No. IPA.1</p> <p>Section 6 – Accidental Release Measures <br />Person-related Safety Precautions:</p> <p>Provide plenty of fresh air. Avoid eye and skin contact. Avoid inhalation <br />of vapors. Wear personal protective equipment.</p> <p>Methods for cleaning-up:</p> <p>Isolate the hazard and deny entry to unnecessary and unprotected <br />personnel. Do not walk through or otherwise scatter spilled material. <br />Small spills: Absorb with dry chemical absorbent, earth, sand or any <br />other inert material. Large spills: Create a dike or trench to contain <br />product. Follow same procedure as for a small spill.</p> <p>Waste Disposal Method:</p> <p>Dispose in accordance with local, state and federal regulations.</p> <p>Ecological Information:</p> <p>Do not allow product to reach ground water, bodies of water, or storm <br />water or sewage systems.</p> <p>Section 7 – Handling and Storage <br />Handling:</p> <p>Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. <br />Follow all SDS/label precautions even after the container is emptied because it <br />may retain product residues. Use only with adequate ventilation. Keep container <br />closed when not in use. Do not reseal if contaminated. Keep away from heat and <br />flame.</p> <p>Storage:</p> <p>Keep container tightly closed when not in use. Do not store in direct sunlight. <br />Avoid UV light.</p> <p>Storage Temperature:</p> <p>4 C – 32 C (~40 F - ~90 F).</p> <p>o</p> <p>o</p> <p>o</p> <p>o</p> <p>Section 8 – Exposure Controls / Personal Protection <br />Exposure Limits: <br />COMPONENT <br />Tin mercaptide</p> <p>CAS NUMBER <br />Trade Secrete</p> <p>OSHA/PEL <br />3 <br />0.1 Skin mg/m</p> <p>ACGIH/TLV <br />3 <br />0.1 Skin mg/m</p> <p>Engineering Controls:</p> <p>Use adequate ventilation.</p> <p>Respiratory Protection:</p> <p>Use local exhaust ventilation. For airborne exposure above exposure limit(s), <br />wear a NIOSH approved air-purifying respirator equipped with organic vapor <br />cartridges. For situations where the atmospheric levels may exceed the level for <br />which an air-purifying respirator is effective, use a positive-pressure air-supplying <br />respirator.</p> <p>Skin Protection:</p> <p>Wear chemical resistant protective clothing and footwear impervious to the <br />product if there is a potential for skin contact.</p> <p>Hand Protection:</p> <p>Glove(s): neoprene.</p> <p>Eye Protection:</p> <p>Use safety goggles or face shield.</p> <p>Other Protective Equipment: A safety shower and eye wash fountain should be readily available. <br />Work/Hygienic Practices:</p> <p>Wash hands before breaks and after work, and before eating, drinking or <br />smoking.</p> <p>Section 9 – Physical and Chemical Properties <br />Page 3 of 5</p> <p>IDENTITY:</p> <p>SAFETY DATA SHEET</p> <p>InjectPro-Accelerator</p> <p>Physical state: <br />Color: <br />Odor: <br />Solubility in water: <br />Boiling point: <br />Flash point: <br />Vapor Pressure: <br />Vapor Density (air = 1): <br />Flammability: <br />o <br />Specific Gravity (water = 1) at 25 C: <br />o <br />Viscosity, (kinematic) at 25 C: <br />pH:</p> <p>SDS No. IPA.1</p> <p>Liquid <br />Colorless <br />Mild amine <br />Slight <br />No data <br />> 102°C (>216°F) (closed cup) <br />o <br />O <br />5 mmHg at 20 C (68 F) <br />Heavier than air <br />No data <br />3 <br />0.93 – 0.96 g/cm <br />25 – 60 cps <br />10.1</p> <p>Section 10 – Stability and Reactivity <br />Reactivity:</p> <p>No dangerous reaction known under conditions of normal use.</p> <p>Hazardous Decomposition Products: Carbon oxides, nitrogen oxides, ammonia, aldehydes and tin oxide. <br />Chemical Stability:</p> <p>Stable under normal temperatures and pressures. Keep away from heat <br />sources. Contains the following stabilizer(s): MEHQ.</p> <p>Hazardous Polymerization:</p> <p>Will not occur.</p> <p>Incompatibilities:</p> <p>Mineral acids, organic acids, oxidizing agents, reactive metals and <br />peroxides.</p> <p>Section 11 – Toxicological Information <br />Acute toxicity: <br />Tertiary amines</p> <p>Tin mercaptide <br />Carcinogenity:</p> <p>Dermal: <br />Oral: <br />Inhalation:</p> <p>LD50 <br />LD50 <br />LC50</p> <p>>12000 mg/kg <br />1600 mg/kg <br />> 16000 ppm/8 h</p> <p>(rabbit). <br />(rat). <br />(rat).</p> <p>Dermal: <br />Oral:</p> <p>LD50 <br />LD50</p> <p>1000 – 1999 mL/kg <br />>2000 mg/kg</p> <p>(rabbit). <br />(rat).</p> <p>IARC: Not regulated as a carcinogen. <br />NTP: Not regulated as a carcinogen. <br />OSHA: Not regulated as a carcinogen.</p> <p>Section 12 – Ecological Information <br />Ecotoxicological Information: Aquatic Toxicity <br />Tertiary amines: EC50 (48h) 10,000 mg/l (Pimephales promelas) <br />Tin mercaptide: EC50 (48h) 0.11 mg/l (Daphnia magna)</p> <p>Section 13 – Disposal Considerations <br />Product waste:</p> <p>Must be disposed of in a manner consistent with federal, state and local regulations.</p> <p>Packaging waste:</p> <p>Decontaminate and pass to an approved drum recycler or destroy and dispose of in a <br />Page 4 of 5</p> <p>IDENTITY:</p> <p>SAFETY DATA SHEET</p> <p>InjectPro-Accelerator</p> <p>SDS No. IPA.1</p> <p>manner consistent with federal, state and local regulations. <br />RCRA/EPA Waste Information: If discarded in its purchased form, this material is not a RCRA hazardous waste.</p> <p>Section 14 – Transport Information <br />USDOT (Domestic Surface): <br />IMO (Ocean): <br />IATA/ICAO (Air):</p> <p>Not regulated <br />Not regulated <br />Not regulated</p> <p>Section 15 – Regulatory Information <br />TSCA (Toxic Substances Control Act): <br />RCRA Status:</p> <p>All components are on TSCA inventory.</p> <p>If discarded in its purchased form, this material is not a RCRA hazardous waste.</p> <p>US Federal Regulatory Information: <br />SARA Title III (Superfund Amendments and Reauthorization Act: <br />311/312 Hazard Categories: <br />Acute. <br />313 Reportable Components: <br />None. <br />CERCLA (Comprehensive Environmental Response and Liability Act):</p> <p>Nnone.</p> <p>Section 16 – Other Information <br />Abbreviations and acronyms: <br />USDOT: <br />IMDG: <br />IATA: <br />CAS: <br />LC50: <br />LD50: <br />EC50: <br />RQ:</p> <p>United States Department of Transportation. <br />International Maritime Code for Dangerous Goods. <br />International Air Transport Association. <br />Chemical Abstracts Service (Division of the American Chemical Society). <br />Lethal concentration, 50 percent. <br />Lethal dose, 50 percent. <br />Median effective concentration. <br />Reportable quantity.</p> <p>This SDS is on a three year review cycle. If the date on this sheet is older than three years please contact Aquafin, <br />Inc. for an updated SDS. <br />SDS prepared by:</p> <p>Aquafin product safety department.</p> <p>DISCLAIMER: <br />We believe the statements, technical information and recommendations contained herein are reliable, but they are <br />given without warranty or guarantee of any kind, expressed or implied, and we assume no responsibility for any <br />loss, damage, or expense, direct or consequential, arising out of their use. Aquafin shall not be responsible for the <br />use of this product in a manner to infringe on any patent or any other intellectual property rights held by others. <br />User is responsible for determining appropriate safety measures and for applying the legislation covering his own <br />activities. We recommend that user makes tests to determine the suitability of a product for its particular purpose <br />prior to use. <br />END OF SDS</p> <p>Page 5 of 5</p> <p>(February 15, 2019)</p>
