TDS-InjectPro-SuperFAST 061815.pdf
2 Pages
54.3 KB
Download
<h1>TDS-InjectPro-SuperFAST 061815.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>InjectPro-SuperFAST</p> <p>Fast reacting, two component, expansive hydrophobic polyurethane grout <br />CSI Div. 03 <br />03 64 00 Injection Grouting</p> <p>Physical Properties - liquid <br />(un-cured)</p> <p>Product Description: <br />InjectPro-SuperFAST is a very fast reacting, expansive hydrophobic <br />polyurethane injection grout. It cures to a rigid, durable, closed <br />cell polyurethane foam resistant to most organic solvents, mild <br />acids, alkali, petroleum and micro-organisms. InjectPro-SuperFAST <br />is designed to stop active water leaks and fill voids in concrete, <br />gravel layers and rock fissures. The closed cell foam will maintain its <br />physical form and is not subject to shrinkage due to wet/dry cycles.</p> <p>Color</p> <p>The system is comprised of an “A” component (base resin) and a “B” <br />component and is injected at a 1:1 ratio. It is available in easy to <br />use cartridges for hand injection, or can be pumped using a plural <br />component pump such as the 2K-Inject Pump.</p> <p>Density (ASTM D-1622)</p> <p>Typical Applications: <br />Any concrete structure with very high water flow such as: <br />• Water Retaining Structures <br />• Waste Water Treatment Plants & Manholes <br />• Concrete Dams <br />• Tunnels <br />Advantages: <br />• 100% solids, non-flammable <br />• Hydrophobic - can be used in wet and dry environments <br />• Very fast reaction time! ~30 seconds <br />• Can expand more than 25 times initial volume <br />• Excellent resistance and durability <br />• Non-hazardous shipping <br />• Non-toxic permanent seal <br />Installation Procedures: <br />Refer to the InjectPro Grouting Guideline for full instructions. <br />Cartridges: <br />Use a dual component cartridge dispensing tool to ensure 1:1 <br />mixing ratio of product. After preping drill holes appropriately, <br />remove the cap on top of the cartridge. Attach the static mixing <br />nozzle and ensure entire cartridge is held upright until you are ready <br />to start injecting. Insert the static mixing nozzle into the drill hole and <br />depress quickly with even strokes. Inject the entire cartridge in one <br />use, changing the static mixer once mixing is started may not be <br />possible due to the very fast reaction time. <br />Plural Component Pump: <br />For larger volume grouting a plural component pump - such as the <br />Aquafin 2K-Inject Pump - can be used. The pump must be set to <br />ensure a 1:1 ratio of component A : component B. Follow all pump <br />manufacturers instructions for proper procedures to prime pump and <br />hoses as well as flushing static mixing block and lines. <br />Check our website for the latest version of the Technical Datasheet. <br />www.aquafin.net</p> <p>InjectPro-SuperFAST Comp A</p> <p>InjectPro-SuperFAST Comp B</p> <p>Dark Amber</p> <p>Amber</p> <p>Viscosity (ASTM D-1638)</p> <p>~250 cps</p> <p>~525 cps</p> <p>Flash Point (ASTM D-92)</p> <p>>200°F</p> <p>>200°F</p> <p>Initial reaction <br />Full reaction</p> <p>Physical Properties - solid (cured) <br />Elongation (ASTM D-1623)</p> <p>~10 seconds <br />20 – 30 seconds <br />InjectPro-SuperFAST <br />3 lbs/ft3 <br />5%</p> <p>Tensile Strength (ASTM D-1623)</p> <p>75 psi</p> <p>Shear Strength (ASTM C-273)</p> <p>50 psi</p> <p>Water Absorption (ASTM D-2127)</p> <p>< 1%</p> <p>Shrinkage</p> <p>< 1%</p> <p>During injection, the grout will follow the path of least resistance. <br />When the material has stopped penetrating it will continue to <br />expand against the confines of the crack/joint and compress within <br />itself, forming a very dense, closed cell material stopping the leak. <br />Packaging: <br />InjectPro-SuperFAST is available in: <br />10 gallon kit: <br />5 gallon pail Component-A <br /> <br />5 gallon pail Component-B <br />600 ml cartridges: <br />300 ml Component-A <br /> <br />300 ml Component-B <br />Storage & Shelf Life: <br />12 months when stored properly. Product is highly moisture sensitive. Store in original sealed containers at temperature between <br />60°F – 90°F. Opened containers must be handled properly to <br />prevent moisture contamination. <br />Limitations: <br />• Temperature significantly affects viscosity. Protect material from <br />excessive heating and cooling prior to grouting to avoid affecting <br />viscosity. <br />• If using water baths to cool or heat pails avoid splashes to prevent <br />water coming in direct contact with resin - this will activate the <br />reaction. Do not warm above 90°F. <br />• Do not reseal containers of contaminated materials as it can create <br />pressure. <br />• Clean up spills with adequate ventilation and appropriate personal <br />Page 1 of 2</p> <p>(updated 06/17/2015EK)</p> <p>InjectPro-SuperFAST <br />protective equipment. Cover the spill area with absorbent material <br />such as clay or vermiculite and transfer to metal waste containers. <br />Wash area with decontamination solution (5-10% solution of <br />sodium carbonate). Dispose of waste in accordance with federal, <br />state and local regulations. <br />Note: <br />Proper application is the responsibility of the user. Field visits <br />by AQUAFIN personnel are for the purpose of making technical <br />recommendations and not for supervising or providing quality control <br />on-site. <br />Safety: <br />Refer to SDS. Use rubber gloves and goggles during mixing and <br />application. Avoid contact with eyes and skin. After contact with <br />skin, wipe up excess liquid then wash with plenty of soap and water. <br />In case of eye contact, rinse immediately with plenty of water and <br />seek medical advice. Avoid breathing vapors. Use in well ventilated <br />areas, or, in the case of confined spaces, use self-contained <br />respiratory protection. Do not ingest. KEEP OUT OF REACH OF <br />CHILDREN. <br />LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year <br />from the date of installation to be manufactured free of defects and to be consistent with its <br />technical properties as stated in our current Technical Data Sheet. This product must be used <br />as directed and within its stated shelf life. AQUAFIN INC. will replace or at our discretion <br />refund the purchase price of any product, excluding cost of labor, which is proven to be <br />defective. Our product recommendations are based on industry standards and testing <br />procedures. It is the buyer’s obligation to test the suitability of the product for an intended use <br />prior to using it. We assume no warranties written, expressed or implied as to any specific <br />methods of application or use of the product. AQUAFIN INC. MAKES NO WARRANTY <br />AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS <br />WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, <br />INC. shall not be liable for damages of any sort including remote or consequential <br />damages, down time, or delay. Any claim for a defective product must be filed within 30 <br />days of discovery of a problem, and must be submitted with written proof of purchase.</p> <p>For Professional Use Only.</p> <p>Check our website for the latest version of the Technical Datasheet. Only the current version is legally binding - and only for the intended market. In cases of <br />uncertainty contact our technical department for further information before starting any applications. <br />www.aquafin.net <br />Page 2 of 2</p> <p>(updated 06/17/2015EK)</p>
