SDS_AQUAFIN-PRO-Tekt TOPCOAT_B-Component-iso.pdf
11 Pages
225 KB
Download
<h1>SDS_AQUAFIN-PRO-Tekt TOPCOAT_B-Component-iso.pdf</h1> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Date prepared: MARCH 2017 <br />Date revised: FEBRUARY 2019</p> <p>SDS No. PRO T.3.2</p> <p>Section 1 – Product Identification <br />IDENTITY: Product Name:</p> <p>PRO-TEKT TOPCOAT, Component B</p> <p>AQUAFIN, INC. <br />505 BLUE BALL RD. #160 <br />ELKTON, MD 21921</p> <p>Emergency Phone No. <br />Information Phone No.</p> <p>info@aquafin.net</p> <p>Recommended use of the chemical and restriction on use:</p> <p>(800) 394-1410 <br />(410) 392-2300</p> <p>www.aquafin.net</p> <p>Refer to the product technical data sheet. <br />For industrial and professional users.</p> <p>Section 2 – Hazards Identification <br />GHS Classification: <br />This material is hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29CFR <br />1910.1200. <br />Acute toxicity - Category 3 - Inhalation <br />Eye irritation - Category 2A <br />Skin sensitization - Category 1 <br />Specific target organ toxicity - single exposure - Category 3</p> <p>GHS Label element: <br />Hazard Pictograms <br />GHS06 <br />Signal Word:</p> <p>GHS07</p> <p>DANGER!</p> <p>Hazard Statements: <br />H317 <br />May cause an allergic skin reaction. <br />H319 <br />Causes serious eye irritation. <br />H331 <br />Toxic if inhaled. <br />H335 <br />May cause respiratory irritation. <br />Precautionary Statements: <br />Prevention: <br />P201 <br />Obtain special instructions before use. <br />P202 <br />Do not handle until all safety precautions have been read and understood. <br />P261 <br />Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. <br />P264 <br />Wash skin thoroughly after handling. <br />P271 <br />Use only outdoors or in a well-ventilated area. <br />P272 <br />Contaminated work clothing should not be allowed out of the workplace. <br />P280 <br />Wear protective gloves/ protective clothing/ eye protection/ face protection. <br />Response: <br />P302+352 <br />P304+340+311</p> <p>IF ON SKIN: Wash with plenty of soap and water. <br />IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a <br />POISON CENTER/doctor. <br />Page 1 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>P305+351+338</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>P333+313 <br />P337+313 <br />P363</p> <p>IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if <br />present and easy to do. Continue rinsing. . <br />If skin irritation or rash occurs: Get medical advice/ attention. <br />If eye irritation persists: Get medical advice/ attention. <br />Wash contaminated clothing before reuse.</p> <p>Storage: <br />P403+404+405</p> <p>Store in a well-ventilated place. Keep container tightly closed. Store locked up.</p> <p>Disposal: <br />P501:</p> <p>Dispose of contents/container to an approved waste disposal site.</p> <p>Other hazards:</p> <p>Water Reactive</p> <p>Section 3 – Composition / Information on Ingredients <br />This product is a mixture.</p> <p>Hazardous Components <br />1,6-diisocyanatohexane, homopolymer</p> <p>CAS No. <br />28182-81-2</p> <p>Weight % <br />>= 40.0 - <= 70.0 %</p> <p>Aliphatic Polyisocyanate</p> <p>164250-92-4</p> <p>>= 15.0 - <= 40.0 %</p> <p>108-32-7</p> <p>>= 10.0 - <= 30.0 %</p> <p>Propylene carbonate</p> <p>Section 4 – First Aid Measures <br />General Advice:</p> <p>First Aid responders should pay attention to self-protection and use the recommended <br />protective clothing (chemical resistant gloves, splash protection). If potential for <br />exposure exists refer to Section 8 for specific personal protective equipment.</p> <p>After Inhalation:</p> <p>Move person to fresh air. If not breathing, give artificial respiration; if by mouth to <br />mouth use rescuer protection (pocket mask, etc.). If breathing is difficult, oxygen <br />should be administered by qualified personnel. Call a physician or transport to a <br />medical facility.</p> <p>After Skin Contact:</p> <p>Remove material from skin immediately by washing with soap and plenty of water. <br />Remove contaminated clothing and shoes while washing. Seek medical attention if <br />irritation persists. Wash clothing before reuse. An MDI skin decontamination study <br />demonstrated that cleaning very soon after exposure is important, and that a <br />polyglycol-based skin cleanser or corn oil may be more effective than soap and water. <br />This may also apply to other isocyanates. Discard items which cannot be <br />decontaminated, including leather articles such as shoes, belts and watchbands. <br />Safety shower should be located in immediate work area.</p> <p>After Eye Contact:</p> <p>Flush eyes thoroughly with water for several minutes. Remove contact lenses after the <br />initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, <br />consult a physician, preferably an ophthalmologist. Suitable emergency eye wash <br />facility should be available in work area.</p> <p>After Ingestion:</p> <p>If swallowed, seek medical attention. Do not induce vomiting unless directed to do so <br />by medical personnel. <br />Page 2 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Most important symptoms and effects, both acute and delayed: Aside from the information found under <br />Description of first aid measures (above) and Indication of immediate medical attention and special treatment <br />needed (below), any additional important symptoms and effects are described in Section 11: Toxicology <br />Information. <br />Indication of any immediate medical attention and special treatment needed <br />Notes to physician: <br />Excessive exposure may aggravate preexisting asthma and other respiratory <br />disorders (e.g. emphysema, bronchitis, reactive airways dysfunction syndrome). <br />Maintain adequate ventilation and oxygenation of the patient. May cause respiratory <br />sensitization or asthma-like symptoms. Bronchodilators, expectorants and antitussives <br />may be of help. Treat bronchospasm with inhaled beta2 agonist and oral or parenteral <br />corticosteroids. Respiratory symptoms, including pulmonary edema, may be delayed. <br />Persons receiving significant exposure should be observed 24-48 hours for signs of <br />respiratory distress. If you are sensitized to diisocyanates, consult your physician <br />regarding working with other respiratory irritants or sensitizers. Treatment of exposure <br />should be directed at the control of symptoms and the clinical condition of the patient.</p> <p>Section 5 – Fire Fighting Measures <br />Extinguishing Media: Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire <br />extinguishers. Foam. Alcohol resistant foams (ATC type) are preferred. General purpose synthetic foams <br />(including AFFF) or protein foams may function, but will be less effective. <br />Unsuitable extinguishing media: Do not use direct water stream. May spread fire. <br />Special hazards arising from the substance or mixture: <br />Hazardous combustion products: During a fire, smoke may contain the original material in addition to <br />combustion products of varying composition which may be toxic and/or irritating. Combustion products may <br />include and are not limited to: Nitrogen oxides. Isocyanates. Hydrogen cyanide. Carbon monoxide. Carbon <br />dioxide. <br />Unusual Fire and Explosion Hazards: Product reacts with water. Reaction may produce heat and/or gases. <br />This reaction may be violent. Container may rupture from gas generation in a fire situation. Violent steam <br />generation or eruption may occur upon application of direct water stream to hot liquids. Dense smoke is <br />produced when product burns. <br />. <br />Advice for firefighters <br />Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. Stay upwind. Keep out <br />of low areas where gases (fumes) can accumulate. Water is not recommended, but may be applied in large <br />quantities as a fine spray when other extinguishing agents are not available. Do not use direct water stream. <br />May spread fire. Fight fire from protected location or safe distance. Consider the use of unmanned hose <br />holders or monitor nozzles. Immediately withdraw all personnel from the area in case of rising sound from <br />venting safety device or discoloration of the container. Move container from fire area if this is possible without <br />hazard. Use water spray to cool fire-exposed containers and fire-affected zone until fire is out. Contain fire <br />water run-off if possible. Fire water run-off, if not contained, may cause environmental damage. Review the <br />"Accidental Release Measures" and the "Ecological Information" sections of this (M)SDS. <br />Special protective equipment for firefighters: Wear positive-pressure self-contained breathing apparatus <br />(SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers, boots, and gloves). Avoid <br />contact with this material during fire fighting operations. If contact is likely, change to full chemical resistant fire <br />fighting clothing with self-contained breathing apparatus. If this is not available, wear full chemical resistant clothing <br />with self-contained breathing apparatus and fight fire from a remote location. For protective equipment in post-fire <br />or non-fire clean-up situations, refer to the relevant sections. <br />Page 3 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Section 6 – Accidental Release Measures <br />Personal precautions, protective equipment and emergency procedures: Isolate area. Keep unnecessary <br />and unprotected personnel from entering the area. Refer to section 7, Handling, for additional precautionary <br />measures. Keep personnel out of low areas. Keep upwind of spill. Ventilate area of leak or spill. See Section 10 <br />for more specific information. Use appropriate safety equipment. For additional information, refer to Section 8, <br />Exposure Controls and Personal Protection. <br />Environmental precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. <br />See Section 12, Ecological Information. <br />Methods and materials for containment and cleaning up: Contain spilled material if possible. Collect in <br />suitable and properly labeled containers. See Section 13, Disposal Considerations, for additional information.</p> <p>Section 7 – Handling and Storage <br />Precautions for safe handling: Avoid contact with eyes, skin and clothing. Avoid prolonged or repeated <br />contact with skin. Avoid breathing vapor. Wash thoroughly after handling. Keep container closed. Use with <br />adequate ventilation. Spills of these organic materials on hot fibrous insulations may lead to lowering of the <br />autoignition temperatures possibly resulting in spontaneous combustion. See Section 8, EXPOSURE <br />CONTROLS AND PERSONAL PROTECTION. <br />Conditions for safe storage: Protect from atmospheric moisture. Store in a dry place. Do not store product <br />contaminated with water to prevent potential hazardous reaction. Avoid moisture. Store in accordance with <br />good manufacturing practices.</p> <p>Section 8 – Exposure Controls / Personal Protection <br />Control Parameters: <br />Exposure limits are listed on next page, if they exist. <br />Component</p> <p>1,6-diisocyanatohexane, <br />homopolymer</p> <p>Regulation <br />DOW IHG</p> <p>Type of listing <br />TWA</p> <p>DOW IHG <br />DOW IHG <br />DOW IHG</p> <p>TWA <br />STEL <br />STEL</p> <p>Value/Notation</p> <p>0.1 mg/m3 <br />DSEN, RSEN <br />0.3 mg/m3 <br />DSEN, RSEN</p> <p>Exposure controls: <br />Engineering controls: Use local exhaust ventilation, or other engineering controls to maintain airborne levels <br />below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or <br />guidelines, general ventilation should be sufficient for most operations. Local exhaust ventilation may be <br />necessary for some operations. <br />Individual protection measures: <br />Eye/face protection: Use safety glasses (with side shields). <br />Skin protection: <br />Hand protection: Use gloves chemically resistant to this material. <br />Other protection: Use protective clothing chemically resistant to this material. Selection of specific <br />items such as face shield, boots, apron, or full body suit will depend on the task. <br />Respiratory protection: Respiratory protection should be worn when there is a potential to exceed the <br />exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, <br />Page 4 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been <br />experienced, or where indicated by your risk assessment process. For emergency conditions, use an approved <br />positive-pressure self-contained breathing apparatus.</p> <p>Section 9 – Physical and Chemical Properties <br />Appearance: <br />Physical State <br />Color <br />Odor <br />Odor Threshhold <br />pH <br />Melting point/range <br />Freezing point <br />Boiling point <br />Flash point <br />Evaporation Rate (Butyl <br />Acetate = 1) <br />Flammability (solid, gas) <br />Lower explosion limit <br />Upper explosion limit <br />Vapor Pressure <br />Relative Vapor Density <br />Relative Density <br />Water Solubility <br />Partition coefficient: <br />n-octanol/water <br />Auto-ignition temperature <br />Decomposition temperature <br />Kinematic Viscosity <br />Explosive properties <br />Molecular weight</p> <p>Liquid <br />Clear <br />Odorless <br />No test data available. <br />No data available. <br />No data available. <br />No data available. <br />No data available. <br />Closed cup >=199.9°F Estimated ( >=93.3 °F) <br />Open cup >=199.9°F Estimated ( >=93.3 °F) <br />Not available. <br />Not applicable. <br />Liquid. <br />Liquid. <br />No data available. <br />No data available. <br />No data available. <br />No data available. <br />This product is a mixture. See Section 12 for individual <br />component data. <br />No data available. <br />No data available. <br />No data available. No data available. <br />Not Reported.</p> <p>.</p> <p>NOTE: The physical data presented above are typical values and should not be construed as a specification.</p> <p>Section 10 – Stability and Reactivity <br />Reactivity: Diisocyanates react with many materials and the rate of reaction increases with temperature as <br />well as increased contact; these reactions can become violent. Contact is increased by stirring or if the other <br />material mixes with the diisocyanate. Diisocyanates are not soluble in water and sink to the bottom, but react <br />slowly at the interface. The reaction forms carbon dioxide gas and a layer of solid polyurea. Reaction with water <br />will generate carbon dioxide and heat. <br />Chemical stability: Stable under recommended storage conditions. See Storage, Section 7. <br />Possibility of hazardous reactions: Can occur. Exposure to elevated temperatures can cause product to <br />decompose and generate gas. This can cause pressure build-up and/or rupturing of closed containers. <br />Polymerization can be catalyzed by: Strong bases. Water. <br />Conditions to avoid: Exposure to elevated temperatures can cause product to decompose. Generation of gas <br />during decomposition can cause pressure in closed systems. Pressure build-up can be rapid. Avoid moisture. <br />Page 5 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Material reacts slowly with water, releasing carbon dioxide which can cause pressure buildup and rupture of <br />closed containers. Elevated temperatures accelerate this reaction. <br />Incompatible materials: Avoid contact with: Acids. Alcohols. Amines. Water. Ammonia. Bases. Metal <br />compounds. Moist air. Strong oxidizers. Diisocyanates react with many materials and the rate of reaction <br />increases with temperature as well as increased contact; these reactions can become violent. Contact is <br />increased by stirring or if the other material mixes with the diisocyanate. Diisocyanates are not soluble in water <br />and sink to the bottom, but react slowly at the interface. The reaction forms carbon dioxide gas and a layer of <br />solid polyurea. Reaction with water will generate carbon dioxide and heat. Avoid contact with metals such as: <br />Aluminum. Zinc. Brass. Tin. Copper. Galvanized metals. Avoid contact with absorbent materials such as: Moist <br />organic absorbents. Avoid unintended contact with polyols. The reaction of polyols and isocyanates generate <br />heat. <br />Hazardous decomposition products: Decomposition products depend upon temperature, air supply and the <br />presence of other materials. Gases are released during decomposition.</p> <p>Section 11 – Toxicological Information <br />Toxicological information appears in this section when such data is available. <br />Acute toxicity <br />Acute oral toxicity <br />Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts. <br />As product: Single dose oral LD50 has not been determined. <br />Based on information for component(s): <br />LD50, Rat, > 5,000 mg/kg Estimated. <br />Acute dermal toxicity <br />Prolonged skin contact is unlikely to result in absorption of harmful amounts. <br />As product: The dermal LD50 has not been determined. <br />Based on information for component(s): <br />LD50, Rabbit, > 5,000 mg/kg Estimated. <br />Acute inhalation toxicity <br />Excessive exposure may cause severe irritation to upper respiratory tract (nose and throat) and lungs. <br />Asthma-like symptoms may include coughing, difficult breathing and a feeling of tightness in the chest. <br />Occasionally, breathing difficulties may be life threatening. May cause pulmonary edema (fluid in the <br />lungs.) Effects may be delayed. Decreased lung function has been associated with overexposure to <br />isocyanates. <br />As product: The LC50 has not been determined. <br />Skin corrosion/irritation <br />Brief contact may cause slight skin irritation with local redness. <br />Prolonged contact may cause skin irritation with local redness. <br />Serious eye damage/eye irritation <br />May cause moderate eye irritation. <br />Sensitization <br />Based on information for component(s): <br />Page 6 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>For skin sensitization: <br />Skin contact may cause an allergic skin reaction. <br />Hexamethylene diisocyanate is a potent skin sensitizer. Severe skin rash/allergic skin reactions have been <br />noted in people exposed to aerosols/vapors of heated material. <br />Has caused allergic skin reactions when tested in guinea pigs. <br />For respiratory sensitization: <br />No signs of respiratory sensitization have been reported. <br />Specific Target Organ Systemic Toxicity (Single Exposure) <br />The substance or mixture is classified as specific target organ toxicant, single exposure, category 3 with <br />respiratory tract irritation. <br />Specific Target Organ Systemic Toxicity (Repeated Exposure) <br />Based on information for component(s): <br />Decreased lung function has been associated with overexposure to isocyanates. <br />Carcinogenicity <br />No relevant data found. <br />Teratogenicity <br />No relevant data found. <br />Reproductive toxicity <br />No relevant data found. <br />Mutagenicity <br />In vitro genetic toxicity studies were negative for component(s) tested. Genetic toxicity studies in animals were <br />negative for component(s) tested. <br />Aspiration Hazard <br />Based on physical properties, not likely to be an aspiration hazard. <br />COMPONENTS INFLUENCING TOXICOLOGY: <br />1,6-diisocyanatohexane, homopolymer <br />Acute inhalation toxicity <br />LC50, Rat, male, 4 Hour, dust/mist, 0.543 mg/l <br />Aliphatic Polyisocyanate <br />Acute inhalation toxicity <br />LC50, Rat, female, 4 Hour, dust/mist, 1.5 mg/l Acute toxicity estimate <br />Propylene carbonate <br />Acute inhalation toxicity <br />No adverse effects are anticipated from single exposure to vapor. <br />The LC50 has not been determined.</p> <p>Section 12 – Ecological Information <br />Ecotoxicological information appears in this section when such date is available.</p> <p>Toxicity:</p> <p>Page 7 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>1,6-diisocyanatohexane, homopolymer <br />Acute toxicity to fish <br />Material is practically non-toxic to aquatic organisms on an acute basis (LC50/EC50/EL50/LL50 >100 mg/L <br />in the most sensitive species tested). <br />NOEC mortality, Danio rerio (zebra fish), static test, 96 Hour, > 100 mg/l, OECD Test Guideline 203 or <br />Equivalent <br />Acute toxicity to aquatic invertebrates <br />NOEC, Daphnia magna, Static, 48 Hour, > 100 mg/l, OECD Test Guideline 202 or Equivalent <br />Acute toxicity to algae/aquatic plants <br />EC50, alga Scenedesmus sp., static test, 72 Hour, Biomass, > 1,000 mg/l <br />Toxicity to bacteria <br />EC50, activated sludge, Respiration inhibition, 3 Hour, > 1,000 mg/l, OECD 209 Test <br />Aliphatic Polyisocyanate <br />Acute toxicity to fish <br />For similar material(s): <br />Material is practically non-toxic to aquatic organisms on an acute basis (LC50/EC50/EL50/LL50 >100 mg/L <br />in the most sensitive species tested). <br />LC50, zebra fish (Brachydanio rerio), Static, 96 Hour, > 100 mg/l, Directive 67/548/EEC, Annex V, C.1. <br />Propylene carbonate <br />Acute toxicity to fish <br />Material is practically non-toxic to aquatic organisms on an acute basis (LC50/EC50/EL50/LL50 >100 mg/L <br />in the most sensitive species tested). <br />LC50, Cyprinus carpio (Carp), semi-static test, 96 Hour, > 1,000 mg/l <br />Acute toxicity to aquatic invertebrates <br />EC50, Daphnia magna (Water flea), 48 Hour, > 1,000 mg/l, OECD Test Guideline 202 or Equivalent <br />Acute toxicity to algae/aquatic plants <br />EC50, alga Scenedesmus sp., 72 Hour, Biomass, > 900 mg/l, Method Not Specified. <br />Toxicity to bacteria <br />EC50, activated sludge, 30 min, > 800 mg/l, OECD 209 Test <br />Persistence and degradability <br />1,6-diisocyanatohexane, homopolymer <br />Biodegradability: 10-day Window: Fail <br />Biodegradation: 0 % <br />Exposure time: 28 d <br />Aliphatic Polyisocyanate <br />Biodegradability: For similar material(s): Material is not readily biodegradable according to OECD/EEC <br />guidelines. In the aquatic and terrestrial environment, material reacts with water forming predominantly <br />insoluble polyureas which appear to be stable.</p> <p>Propylene carbonate</p> <p>Page 8 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Biodegradability: Material is readily biodegradable. Passes OECD test(s) for ready biodegradability. <br />Material is ultimately biodegradable (reaches > 70% mineralization in OECD test(s) for inherent <br />biodegradability). <br />10-day Window: Pass <br />Biodegradation: 94 % <br />Exposure time: 28 d <br />Method: OECD Test Guideline 301E or Equivalent <br />10-day Window: Not applicable <br />Biodegradation: > 97 % <br />Exposure time: 28 d <br />Method: OECD Test Guideline 302B or Equivalent <br />Theoretical Oxygen Demand: 1.25 mg/mg <br />Photodegradation <br />Test Type: Half-life (indirect photolysis) <br />Sensitizer: OH radicals <br />Atmospheric half-life: 34 Hour <br />Method: Estimated. <br />Bioaccumulative potential <br />1,6-diisocyanatohexane, homopolymer <br />Bioaccumulation: No relevant data found. <br />Aliphatic Polyisocyanate <br />Bioaccumulation: In the aquatic and terrestrial environment, movement is expected to be limited by its <br />reaction with water forming predominantly insoluble polyureas. <br />Propylene carbonate <br />Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3). Potential for mobility in <br />soil is very high (Koc between 0 and 50). Given its very low Henry's constant, volatilization from natural <br />bodies of water or moist soil is not expected to be an important fate process. Bioconcentration potential is <br />low (BCF < 100 or Log Pow < 3). <br />Partition coefficient: n-octanol/water(log Pow): -0.41 Measured <br />Mobility in soil <br />1,6-diisocyanatohexane, homopolymer <br />No relevant data found. <br />Propylene carbonate <br />Potential for mobility in soil is very high (Koc between 0 and 50). <br />Given its very low Henry's constant, volatilization from natural bodies of water or moist soil is not expected <br />to be an important fate process. <br />Partition coefficient (Koc): 15 Estimated.</p> <p>Section 13 – Disposal Considerations <br />Disposal methods: NOTICE: Research sample for use by qualified personnel only. Upon completion of tests, <br />dispose of material and container safely and in accord with federal, state/provincial and local laws and <br />regulations. If further information is needed on disposal or use, consult your supplier.</p> <p>Page 9 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Section 14 – Transport Information <br />USDOT (Domestic Surface)</p> <p>Not regulated for transport</p> <p>Classification for SEA transport (IMO-IMDG):</p> <p>Not regulated for transport</p> <p>Transport in bulk according to Annex <br />I or II of MARPOL 73/78 and the IBC <br />or IGC Code</p> <p>Consult IMO regulations before <br />transporting ocean bulk</p> <p>Classification for AIR transport (IATC/ICAO)</p> <p>Not regulated for transport</p> <p>This information is not intended to convey all specific regulatory or operational requirements/information <br />relating to this product. Transportation classifications may vary by container volume and may be influenced by <br />regional or country variations in regulations. Additional transportation system information can be obtained <br />through an authorized sales or customer service representative. It is the responsibility of the transporting <br />organization to follow all applicable laws, regulations and rules relating to the transportation of the material.</p> <p>Section 15 – Regulatory Information <br />Superfund Amendments and Reauthorization Act of 1986 Title III (Emergency Planning and Community <br />Right-to-Know Act of 1986) Sections 311 and 312 <br />Immediate (acute) Health Hazard <br />Superfund Amendments and Reauthorization Act of 1986 Title III (Emergency Planning and Community <br />Right-to-Know Act of 1986) Section 313 <br />This material does not contain any chemical components with known CAS numbers that exceed the threshold <br />(De Minimis) reporting levels established by SARA Title III, Section 313. <br />Pennsylvania Worker and Community Right-To-Know Act: <br />To the best of our knowledge, this product does not contain chemicals at levels which require reporting under <br />this statute. <br />California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986) <br />WARNING: This product contains a chemical(s) known to the State of California to cause cancer. <br />Components</p> <p>CASRN</p> <p>Propylene oxide</p> <p>75-56-9</p> <p>United States TSCA Inventory (TSCA) <br />All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic <br />Substances Control Act (TSCA) Chemical Substance Inventory.</p> <p>Section 16 – Other Information <br />Other information <br />For research use only. <br />Revision <br />Identification Number: 102998247 / A001 / Issue Date: 03/16/2017 / Version: 0.0 <br />Page 10 of 11</p> <p>IDENTITY:</p> <p>PRO-Tekt Topcoat, Component B</p> <p>SAFETY DATA SHEET <br />SDS No. PRO T.3.2</p> <p>Most recent revision(s) are noted by the bold, double bars in left-hand margin throughout this document. <br />Abbreviations and acronyms: <br />Dow IHG <br />DSEN, RSEN <br />STEL <br />TWA</p> <p>Dow Industrial Hygiene Guideline <br />Skin and respiratory sensitizer <br />Short-term exposure limit <br />Time weighted average</p> <p>SDS prepared by:</p> <p>Aquafin product safety department.</p> <p>DISCLAIMER:</p> <p>We believe the statements, technical information and recommendations contained herein are reliable, but they are given <br />without warranty or guarantee of any kind, expressed or implied, and we assume no responsibility for any loss, damage, or <br />expense, direct or consequential, arising out of their use. Aquafin shall not be responsible for the use of this product in a <br />manner to infringe on any patent or any other intellectual property rights held by others. <br />User is responsible for determining appropriate <br />safety <br />measures and for applying the legislation covering <br />activities. <br />END <br />OF MSDS <br />(Aprilhis <br />09,own <br />2015) <br />We recommend that user makes tests to determine the suitability of a product for its particular purpose prior to use. <br />END OF SDS</p> <p>Page 11 of 11</p> <p>(February 27, 2019)</p>
