TDS Crack Sealing Tape 121318SM.pdf
2 Pages
27.3 KB
Download
<h1>TDS Crack Sealing Tape 121318SM.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>AQUAFIN® CRACK SEALING TAPE</p> <p>For sealing cracks in concrete prior to application of waterproof coatings <br />CSI Div. 09 <br />07 16 13 Polymer Modified Cement Waterproofing</p> <p>Physical and Technical Data <br />Material:</p> <p>LEED Points <br />IEQ Credit 4.2, Low-Emitting Materials Paints and Coatings...1 Point <br />Using this AQUAFIN product can help contribute to LEED certification of <br />projects in the category shown above.</p> <p>Polyester fabric with a PVC elastomer coating</p> <p>Color:</p> <p>Gray or White</p> <p>Thickness:</p> <p>Approx. 1/32” (0.8 mm)</p> <p>Elongation:</p> <p>80%</p> <p>Tear Resistance:</p> <p>2,175 psi (15.0 MPa) <br />(ASTM D-2240 - modified)</p> <p>Temperature Resistance:</p> <p>-4˚F (-22˚C) to 140˚F (60˚C)</p> <p>Alkali Resistance:</p> <p>Resistant against boiling in sodium <br />hydroxide with a pH of 12. <br />Resistant against boiling in 2% <br />potassium hydroxide (minimum 10 <br />minutes). <br />Waterproof - resistant to hydrostatic <br />pressure</p> <p>Yield: <br />(Linear Feet of Tape per unit <br />of AQUAFIN-2K/M used <br />for adhesion)</p> <p>~85 ft Tape per 46 lb. (21 kg) kit <br />Aquafin-2KM <br />~145 ft Tape per 77 lb. (35 kg) <br />kit Aquafin-2KM</p> <p>Coverage:</p> <p>1 roll covers 4-3/4” (120 mm) x <br />164 ft. (50 m)</p> <p>Product Description: <br />AQUAFIN CRACK SEALING TAPE is an elastomeric, highly tear resistant, <br />waterproof tape, comprised of a polyester fabric with a PVC elastomer <br />coating. <br />Typical Applications: <br />• For sealing cracks in concrete prior to the application of AQUAFIN2K/M system in waterproofing applications. <br />Advantages: <br />• Quick and easy installation <br />• Waterproof <br />• Permanently flexible <br />• UV stable/resistant <br />• Highly resistant against oil, grease and solvents <br />• Excellent decomposition resistance (microbes) <br />Substrate Preparation: <br />The substrate must be sound, clean, and free from voids or ridges, bug holes, <br />honey combs, and open pored (like medium grit sand paper). <br />• Remove bond breakers, such as oil, grease, dirt, loose particles, remains <br />of form oils, water repellents, rust or other coatings by high pressure waterblasting (>5000 psi (34.5 MPa)) or wet or dry sandblasting. <br />• Prepare surfaces by mechanical means to obtain a surface profile of <br />CSP 3 - CSP 5 per ICRI Guideline No. 310.2-R-2013. <br />• Repair holes, defects, irregular surfaces, weak mortar joints, etc. with <br />MORTAR-V/O or MORTAR-LN. <br />• Close large open pores and joint recesses of CMU blocks and joint <br />unevenness in brick walls with MORTAR-V/O or MORTAR LN. <br />• Dampen substrate with clean water to saturated surface dry (SSD) <br />condition, with no standing surface water. <br />• Static cracks should be routed out in a “u” shaped configuration, approximately 3/4” (20 mm) wide x 1” (25 mm) deep and filled with a suitable <br />concrete repair product, such as AQUAFIN QUICK PATCH, MORTAR <br />V/O , MORTAR-40 CI or MORTAR-LN. <br />• Dynamic (moving cracks) should be filled with a suitable urethane sealant <br />or chemical grout. Pre-soak the area of concrete to be taped with clean <br />water to a saturated surface dry (SSD) condition, with no standing surface <br />water.</p> <p>Check our website for the latest version of the Technical Datasheet. <br />www.aquafin.net</p> <p>All above values theoretical. Variations may apply due to substrate conditions. <br />Thickness per application or lift, up to 50 mils (1.25 mm).</p> <p>Product Application: <br />• AQUAFIN CRACK SEALING TAPE is bonded to concrete with AQUAFIN-2K/M flexible cementitious coating. <br />• Refer to the AQUAFIN-2K/M Technical Data Sheet for mixing instructions. <br />• Apply a coat of AQUAFIN-2K/M, extending a minimum of 3/4” <br />(20mm) beyond either side of tape. <br />• Immediately embed AQUAFIN CRACK SEALING TAPE into the 2K/M <br />uniformly, leaving no wrinkles, using a trowel or similar. <br />• To connect tapes, after installing the first tape, slightly overlap a second <br />tape a minimum of ½” (12mm) using AQUAFIN-2K/M. <br />• Allow 3 to 4 hours to cure before applying the first coat of AQUAFIN <br />2K/M system. <br />Limitations: <br />Before applying the final coat of AQUAFIN 2K/M, inspect the areas sealed <br />with the AQUAFIN CRACK SEALING TAPE. For aesthetic reasons, a light</p> <p>Page 1 of 2</p> <p>(12/13/18-BE/SM)</p> <p>AQUAFIN® CRACK SEALING TAPE <br />sanding or grinding of the 2K/M used to adhere the AQUAFIN CRACK <br />SEALING TAPE may be necessary to “smooth” out the area.</p> <p>Health & Safety: <br />Refer to SDS.</p> <p>Cracks will often telegraph through any overlay material. While crack repair <br />is recommended before application of AQUAFIN 2K/M, AQUAFIN does <br />not warrant that cracks will not reappear, even when following established <br />repair techniques.</p> <p>LIMITED WARRANTY: AQUAFIN, INC. warrants its products to be manufactured free of defects for one year and to be consistent with its standard <br />high quality. We will replace or, at our election, refund the purchase price <br />of, any product which is proven to be defective, provided that the product <br />was properly applied. Our product recommendations are based on Industry <br />Standards and testing procedures. We assume no warranties either written, <br />expressed or implied as to any specific methods of application or use of the <br />product. AQUAFIN, INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. <br />AQUAFIN, INC. shall not be liable for damages of any sort including <br />remote or consequential damages, down time, or delay.</p> <p>Packaging: <br />4-3/4” (120 mm) x 164 ft. (50 m) rolls <br />Shelf Life: <br />Two years, when stored in a dry, enclosed area, in original packaging. <br />Note: <br />Proper application is the responsibility of the user. Field visits by AQUAFIN <br />personnel are for the purpose of making technical recommendations and not <br />for supervising or providing quality control on-site.</p> <p>For Professional Use Only.</p> <p>Check our website for the latest version of the Technical Datasheet. Only the current version is legally binding - and only for the intended market. In cases of uncertainty contact <br />our technical department for further information before starting any applications. <br />Page 2 of 2 <br />www.aquafin.net <br />(12/13/18-BE/SM)</p>
