TDS-Chem-Guard UV_102026.pdf
3 Pages
249 KB
Download
<h1>TDS-Chem-Guard UV_102026.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />e: info@aquafin.net <br />e: technical@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>Chem-Guard UV</p> <p>Hybrid, Two-component, Aliphatic, Polyester, Polyurethane Topcoat <br />CSI Div. 07 & 09 <br />07 18 00 Traffic Coatings <br />07 18 13 Pedestrian Traffic Coatings <br />09 67 00 Fluid-Applied Flooring <br />09 96 13 Abrasion-Resistant Coatings <br />09 96 35 Chemical-Resistant Coatings <br />Product Description: <br />Chem-Guard UV is a tough, chemical-resistant, abrasion-resistant topcoat <br />that is designed to be used over Aquafin’s VAPORTIGHT COAT®-SG2 or <br />VAPORTIGHT COAT®-SG3. Chem-Guard UV delivers long-term durability <br />for demanding interior and exterior environments. <br />Typical Applications: <br />Chem-Guard UV is suitable for a wide range of interior and exterior floor <br />applications, including: <br />• Parking garages <br />• Industrial, manufacturing, and warehouse facilities <br />• Laboratories, research facilities, and pharmaceutical production plants <br />• Power generating plants <br />• Aircraft hangars <br />• Petrochemical plants <br />• Food production plants <br />• Automotive repair businesses <br />• Trade school training shops <br />• Pulp and paper industry <br />• Steel structures and bridges <br />• Marine industry <br />• Rail and subway industries <br />• Mining industry <br />• Tunnels <br />• Commercial and retail buildings <br />Advantages: <br />• Easy to apply <br />• Impact-resistant, abrasion-resistant, and chemical-resistant <br />• Excellent color retention and gloss stability <br />• UV stable <br />Site Mock-up: <br />Aquafin recommends installation of a field sample of min. 100 ft² (9.3 <br />m²) at the project site or other pre-selected area as agreed to by owner’s <br />representative and applicator. <br />• Apply all materials to field sample area in the correct sequence. Follow <br />all manufacturer’s written instructions. <br />• Maintain field sample during construction as the standard for <br />workmanship comparison. Use field sample as standard for judging <br />color and texture on remainder of project. Do not alter, move, or <br />destroy field sample until work is completed and approved by owner’s <br />representative.</p> <p>Check our website for the latest version of the Technical Datasheet. <br />www.aquafin.net</p> <p>Physical and Technical Data <br />Pot Life @ 75°F (24°C) / <br />50% RH:</p> <p>60 to 75 minutes</p> <p>Flash Point:</p> <p>91°F (32.7°C)</p> <p>Total Solids by Volume <br />(ASTM D2697):</p> <p>69%</p> <p>Recoat Time (Chem-Guard UV <br />over SG3) @ 75°F (24°C) / <br />50% RH: <br />• Interior <br />• Exterior</p> <p>minimum 12 hrs. to maximum 5 days <br />minimum 12 hrs. to maximum 48 hrs</p> <p>Recoat Time (Chem-Guard UV <br />over Chem-Guard UV) @ 75°F <br />(24°C) / 50% RH: <br />minimum 12 hrs. to maximum 24 hours <br />VOCs:</p> <p>340 g/L</p> <p>All data are average values obtained under laboratory conditions. In practical use <br />temperature, humidity and absorbance of the substrate may influence the above given <br />values. Dynamic coefficient of friction values will vary depending on final surface texture <br />achieved at the jobsite.</p> <p>Substrate Preparation: <br />• Chem-Guard UV can only be applied over Aquafin’s VAPORTIGHT <br />COAT®-SG2 or VAPORTIGHT COAT®-SG3. Refer to the current <br />VAPORTIGHT COAT®-SG2 or VAPORTIGHT COAT®-SG3 Technical <br />Data Sheet (TDS) for substrate preparation. <br />• Pay close attention to recoat times and ensure that Chem-Guard UV is <br />applied over VAPORTIGHT COAT®-SG2, or VAPORTIGHT COAT®SG3 within the specified recoat window. <br />• For best results, all exterior horizontal surfaces should be sloped <br />according to industry standards to facilitate water removal. <br />Jobsite Preparation: <br />• Protect adjacent areas from Chem-Guard UV. Cured material can only <br />be removed mechanically. <br />•O <br /> nly proceed with application when ambient and surface temperatures <br />are between 65°F to 95°F (18°C to 35°C) and falling and more than <br />6°F (3°C) above the dew point. <br />•D <br /> o not apply Chem-Guard UV when temperatures are expected to fall <br />below 60°F (16°C) within 24 hours after placement. <br />•D <br /> o not apply Chem-Guard UV when the humidity is at or above 90%. <br />• Do not apply Chem-Guard UV when rain is expected within 24 hours <br />after placement. <br />•H <br /> ot surfaces should be cooled and shaded while cold surfaces should <br />be heated and sheltered. <br />Mixing: <br />• Condition Chem-Guard UV components A and B to 70°F to 80°F <br />(21°C to 27°C) prior to mixing and application. <br />• Boxing material is recommended to ensure color uniformity. <br />Page 1 of 3 <br />(10/20/26-EK,SB,AC)</p> <p>Chem-Guard UV <br />• Chem-Guard UV kits are supplied in the appropriate mixing ratio. <br />Always mix full units. <br />• Once containers have been opened, mix and use material as soon as <br />possible. <br />• Pre-mix each of the “A” and “B” components individually to ensure all <br />raw material and pigments are dispersed uniformly. <br />• Combine Side-A and Side-B and mix thoroughly until uniform color is <br />attained. Mix for at least 5 minutes. Thoroughly scrape sides and bottom <br />of pail as material is mixed. <br />• Mix at slow speeds (not exceeding 500 rpm) using a high torque drill <br />with a mixing paddle. <br />• Take care not to entrain air into the material as this may result in pinhole <br />blisters and/or shortened pot life. <br />• Apply Chem-Guard UV immediately after mixing. <br />Application: <br />Read all instructions thoroughly on this Technical Data Sheet (TDS) as <br />well as the TDS for VAPORTIGHT COAT®-SG2 or VAPORTIGHT COAT®SG3. Follow instructions for mixing and application, recoat times, cure <br />times, and other important information. <br />• To maximize the working time and for best results, it is recommended <br />to pour the entire contents of mixed material on to the substrate <br />immediately after mixing. <br />•A <br /> lways apply in a monolithic application. Each layer in the system must <br />be a uniformly thick, void-free, continuous membrane across the entire <br />surface of the application area. <br />• Apply in a continuous wet-on-wet application to minimize lines and/or <br />streaking. <br />Apply Chem-Guard UV: <br />Apply Chem-Guard UV one coat at at time using an airless sprayer, <br />conventional spray equipment, brush or roller. Follow the corresponding <br />instructions below. Refer to Coverage Rate Chart on this TDS for <br />application rates and number of coats. <br />• Airless Sprayer: Apply Chem-Guard UV with a Graco 28:1 <br />pump or higher or Binks airless spray gun with Reversal-Clean <br />0.017-0.019 spray tips and 3/8” solvent resistant fluid line. Adjust <br />pump pressure to the lowest possible setting that provides proper <br />atomization. <br />• Conventional Spray Equipment: Apply Chem-Guard UV with <br />Binks, DeVilbiss, Graco, or Nordson brands of pressure pots or air <br />assisted airless or high volume low pressure systems. <br />• Brush: Apply Chem-Guard UV with a solvent resistant mohair or <br />natural bristle brush with feather edge. <br />• Roller: Apply Chem-Guard UV with a solvent resistant phenolic <br />core, short nap sheep-skin or similar natural roller cover. <br />Curing: <br />• Curing times, working times, and drying times are approximate and <br />will vary depending on ambient (air) temperature, the temperature <br />of Chem-Guard UV in the packaging, surface temperature of cured <br />VAPORTIGHT COAT®-SG2 or VAPORTIGHT COAT®-SG3, and the <br />application thickness. <br />• High temperatures, and high humidity will shorten the curing time and <br />working time. Low temperatures and low humidity will extend the curing <br />time. <br />Protection: <br />• Keep Chem-Guard UV protected from damage by work and other <br />trades until the final topcoat is cured. <br />• Allow at least 24 hours [based on 75°F (24°C) and 50% relative <br />Check our website for the latest version of the Technical Datasheet. <br />www.aquafin.net</p> <p>humidity] before permitting pedestrian traffic on the finished surface after <br />application of Chem-Guard UV as the final topcoat. <br />• Allow at least 72 hours [based on 75°F (24°C) and 50% relative <br />humidity] before permitting forklift traffic on the finished surface after <br />application of Chem-Guard UV as the final topcoat. <br />Limitations: <br />• Do not thin Chem-Guard UV with solvents or dilute in any manner. <br />• Chem-Guard UV performs well in submerged applications, and <br />exposure to water does not adversely affect its physical properties. <br />However, discoloration and fading may occur in areas subject to <br />ponding water, poor drainage, or continuous submersion. <br />• Contact Aquafin’s Technical Department or your local Aquafin <br />Representative for guidance in mixing and placing when jobsite <br />conditions are outside the recommended limits. <br />• Projects and applications not listed on this TDS require pre-approval from <br />Aquafin’s Technical Department prior to application in order to qualify <br />for any type of warranty. Contact Aquafin’s Technical Department or <br />your local Aquafin Representative for assistance. <br />•C <br /> hem-Guard UV and VAPORTIGHT COAT®-SG2 or VAPORTIGHT <br />COAT®-SG3 should be applied to the entire floor surface in order to <br />perform effectively. <br />Clean-up: <br />Clean tools and equipment immediately after use with an environmentally <br />safe solvent. Cured material must be removed mechanically. <br />Packaging: <br />•G <br /> ray or Tan Color Kits: <br />• <br />5 gallon kit (18.9 L) <br />Component A: (1) 1.85 (7.0 L) gal pail <br />Component B: (1) 3.15 (11.9 L) gal pail <br />•C <br /> lear Kits: <br />• <br />5 gallon kit (18.9 L) [net fill 4.75 gal (17.9 L)] <br />Component A: (1) 2.10 (7.95 L) gal pail <br />Component B: (1) 2.65 (10.03 L) gal pail <br />Colors: <br />• In addition to Clear, Chem-Guard UV is available in 2 factory blended <br />colors: Gray and Tan. <br />Storage & Shelf Life: <br />•S <br /> torage: Store material between 65°F to 90°F (18°C to 32°C) <br />in a dry environment, out of direct sunlight and away from sparks, <br />open flame, and moisture. Protect material from freezing. <br />•S <br /> helf Life: 1 year in sealed original, unopened, undamaged <br />containers when stored according to conditions listed above. <br />Note: <br />Proper application is the sole responsibility of the user. Applicators <br />are expected to follow ICRI and ACI guidelines, common concrete <br />practices, and other applicable industry standards. Aquafin personnel and <br />representatives are not site inspectors or construction project managers <br />and therefore do not approve surface preparation, mixing, or application <br />of Aquafin products. Site visits by Aquafin personnel or representatives <br />are solely for the purpose of making technical recommendations, not for <br />providing supervision or quality control. <br />General Information: <br />All details in particular to the suggestions for the processing and use of the <br />Page 2 of 3 <br />(10/20/26-EK,SB,AC)</p> <p>Chem-Guard UV <br />product is based on our present knowledge and experiences at the time <br />of printing. Depending on specific applications, in particular regarding <br />substrates, processing and environmental conditions may affect final results.</p> <p>defective. Our product recommendations are based on industry standards <br />and testing procedures. It is the buyer’s obligation to test the suitability of <br />the product for an intended use prior to using it. We assume no warranties <br />written, expressed, or implied as to any specific methods of application or <br />use of the product. We do not guarantee compatibility of Aquafin products <br />with other brands. For this reason, we strongly recommend application of a <br />sample area at the jobsite to help determine suitability with other products. <br />AQUAFIN INC. MAKES NO WARRANTY AS TO MERCHANTABILITY <br />OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN <br />LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. <br />shall not be liable for damages of any sort including remote or consequential <br />damages, down time, or delay. Any claim for a defective product must be <br />filed within 30 days of discovery of a problem and must be submitted with <br />written proof of purchase.</p> <p>Safety: <br />Refer to SDS. For commercial use only. Avoid contact with skin and eyes. <br />Wear rubber gloves and safety goggles during mixing and application. <br />After contact with skin, wash with plenty of water. In case of eye contact, <br />rinse immediately with plenty of water for 15 minutes and seek medical <br />advice. KEEP OUT OF REACH OF CHILDREN. <br />LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period <br />of one year from the date of installation to be manufactured free of defects <br />and to be consistent with its technical properties as stated in our current <br />Technical Data Sheet. This product must be used as directed and within its <br />stated shelf life. AQUAFIN INC. will replace or at our discretion refund the <br />purchase price of any product, excluding cost of labor, which is proven to be</p> <p>For Professional Use Only.</p> <p>STAN</p> <p>Chem-Guard UV - Coverage Rates <br />Number <br />of Coats</p> <p>Total DFT <br />(Dry Film <br />Thickness) <br />(in mils)</p> <p>1 <br />2 <br />3</p> <p>3-7 <br />6 - 14 <br />10 - 21</p> <p>(in mm)</p> <p>Approx. <br />Coverage <br />Rate <br />(sq. ft. per <br />gal)</p> <p>Approx. <br />Coverage <br />Rate <br />(meters <br />per liter)</p> <p>Chemical Resistance Chart <br />(ASTM D814) <br />Approx. <br />Coverage <br />Rate <br />Per Unit</p> <p>0.1 - 0.2 180 - 200 ft² 4.4 - 4.9 m²</p> <p>855 - 1000 ft² <br />(79 - 93 m²)</p> <p>0.2 - 0.4</p> <p>470 - 550 ft² <br />(44 - 51 m²)</p> <p>0.3 - 0.5</p> <p>99 - 110 ft² <br />54 - 60 ft²</p> <p>2.4 - 2.7 m² <br />1.3 - 1.5 m²</p> <p>EXCELLENT</p> <p>GOOD</p> <p>FAIR</p> <p>POOR</p> <p>Distilled Water</p> <p>Unleaded <br />Gasoline</p> <p>Hexanol</p> <p>IPA, 99%</p> <p>Skydrol</p> <p>Acetone</p> <p>Butanol</p> <p>Skydrol Jet <br />Fuel</p> <p>MEK</p> <p>Hydrolic Oil</p> <p>MIBK</p> <p>Butyl <br />STANDARDMotorCOLOR <br />CHART <br />Oil <br />Acetate</p> <p>256 - 300 ft² <br />(24 - 28 m²)</p> <p>Notes: Application rates and yield values are approximate. Failure to achieve the <br />Toulene <br />recommended mil thickness will compromise product performance. It is the applicator’s <br />Xylene <br />responsibility to verify that the recommended mil thickness has been attained. <br />Applications over VAPORTIGHT COAT®-SG2 must be applied thick enough to <br />STONE GRAY <br />DOLPHIN <br />The <br />chart <br />represents <br />typical <br />chemical <br />resistance <br />of GRAY <br />completely cover the sand aggregate broadcast over VAPORTIGHT COAT®-SG2 and <br />Chem-Guard UV when tested in a laboratory with <br />still achieve the minimum DFT. <br />individual chemicals listed above.</p> <p>In addition to Clear, Chem-Guard UV is available in the following factory blended colors:</p> <p>STONE GRAY</p> <p>DOLPHIN <br />GRAY <br />Light <br />Gray</p> <p>TAN <br />Tan</p> <p>BATTLESHIP GRAY</p> <p>INDIAN SAND</p> <p>Color Chart is a representation of the actual color only. Every effort has been made to reproduce these color samples as faithfully as possible. Color variations between <br />batches may exist. Colors may vary due to differences in surface texture, lighting, and methods of application. When ordering additional products make sure you use the <br />same batch number. You will find the batch number on the product label. Not all colors are always available. Contact Aquafin with questions regarding colors prior to <br />ordering any materials or starting a project. <br />Check our website for the latest version of the Technical Datasheet. <br />www.aquafin.net</p> <p>Page 3 of 3 <br />(10/20/26-EK,SB,AC)</p>
