505 Blue Ball Rd. #160
Elkton, MD 21921
Coated Quartz Sand
Urethane-coated, Quartz Sand
CSI Div. 07
07 18 00 Traffic Coatings
07 18 13 Pedestrian Traffic Coatings
07 18 16 Vehicular Traffic Coatings
Coated Quartz Sand is a unique, coated aggregate that is specially
designed for use with Aquafin polyaspartic and Aquafin urethane coating
systems. It forms an aggressive chemical bond with the coating, resulting in
a high-performing, long-wearing, surface.
• Interior Surfaces, Interior & Exterior Pedestrian Traffic Surfaces, and
Vehicular Traffic Decks as part of an Aquafin coating system.
• See the appropriate Aquafin coating Technical Data Sheet for details
and recommendations about specific areas of use.
• Enhances the durability of the coating system
Aquafin recommends installation of a field sample of min. 100 ft² (9.29
m²) at the project site or other pre-selected area as agreed to by owner’s
representative and applicator.
• Apply all materials to field sample area in the correct sequence. Follow
all manufacturer’s written instructions.
• Maintain field sample during construction for workmanship comparison.
Use field sample as standard for judging color and texture on remainder
of project. Do not alter, move, or destroy field sample until work is
completed and approved by owner’s representative.
Read all instructions thoroughly prior to installation.
• Apply the Aquafin coating according to the Technical Data Sheet,
taking special care to ensure an even application of the coating.
Refer to the coating Technical Data Sheet for information on surface
preparation, coating application, broadcast rate, curing, clean-up, etc.
• Immediately (within 2 min.) of coating application, broadcast Coated
Quartz Sand by hand into the wet coating. For optimum results, follow
directly behind the coating application in a steady, uninterrupted
sequence allowing Coated Quartz Sand to fall vertically into the
coating. To help ensure a uniform appearance, use a consistent
technique and motion when broadcasting Coated Quartz Sand.
• Allow to cure. Refer to coating Technical Data Sheet for cure times. Cure
time will vary depending on temperature and humidity.
• Remove all excess Coated Quartz Sand by sweeping and using dry
Physical and Technical Data Coated Quartz Sand
Grain Size (Sieve Analysis)
natural sand color
All data are averages of several tests under laboratory conditions.
• Protect area from all traffic until cured.
• Higher temperatures and/or high humidity will accelerate the cure time.
Lower temperatures and/or lower humidity will extend the cure time.
Proper application is the responsibility of the user. Field visits by AQUAFIN
personnel are for the purpose of making technical recommendations and
not for supervising or providing quality control on-site.
• 30 lb bag (13.6 kg)
Storage and Shelf Life:
Shelf Life: 1 year in original unopened container. Store material inside
between 50°F to 95°F (10°C to 35°C) and protect from moisture.
Refer to SDS. For commercial use only. Ensure adequate ventilation in
application area. Wear respirator if prolonged exposure will occur. Avoid
contact with eyes. Wear safety goggles during application. Do not wear
contact lenses. KEEP OUT OF REACH OF CHILDREN.
LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year
from the date of installation to be manufactured free of defects and to be consistent
with its technical properties as stated in our current Technical Data Sheet. This product
must be used as directed and within its stated shelf life. AQUAFIN INC. will replace
or at our discretion refund the purchase price of any product, excluding cost of
labor, which is proven to be defective. Our product recommendations are based
on industry standards and testing procedures. It is the buyer’s obligation to test the
suitability of the product for an intended use prior to using it. We assume no warranties
written, expressed or implied as to any specific methods of application or use of the
product. AQUAFIN INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable
for damages of any sort including remote or consequential damages, down time, or
delay. Any claim for a defective product must be filed within 30 days of discovery of a
problem, and must be submitted with written proof of purchase.
For Professional Use Only.
Check our website for the latest version of the Technical Datasheet.
Page 1 of 1
(08/19/22 - EKAC)