TDS-InjectPro_GROUT-OUT 061014.pdf
1 Page
408 KB
Download
<h1>TDS-InjectPro_GROUT-OUT 061014.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>InjectPro Grout-Out</p> <p>Non-flammable, pump flush for urethane grout pumps <br />CSI Div. 03 <br />03 64 00 Injection Grouting</p> <p>Packaging: <br />5 gallon pails or 50 gallon drums</p> <p>Product Description: <br />InjectPro Grout-Out is a non-flammable, maintenance solution for <br />urethane grout pumps, designed to clean and prime the pump <br />and hoses before and after each use, ensuring a moisture free <br />pumping system. InjectPro Grout-Out is solvent free, non-hazardous, <br />non-corrosive and compatible with all Aquafin polyurethane grouts <br />(InjectPro-CUT, InjectPro-LV and Rapidflex-213). InjectPro Grout-Out <br />can be left in the pump and hoses during storage between use.</p> <p>Storage & Shelf Life: <br />Store in original sealed containers at temperature between <br />60°F – 90°F. Opened containers must be handled properly to <br />prevent moisture contamination.</p> <p>Advantages: <br />• Zero VOC’s - meets LEED criteria <br />• 100% solids <br />• Non-flammable <br />• Non-corrosive <br />Physical Properties <br />State <br />Viscosity (ASTM D-1638) <br />Specific Gravity (ASTM D-1475)</p> <p>InjectPro Grout-Out <br />Clear liquid <br />100 cps <br />0.97</p> <p>Flash Point (ASTM D-92)</p> <p>>400°F</p> <p>Boiling Point</p> <p>>480°F</p> <p>Limitations: <br />• InjectPro Grout-Out is used to clean un-cured liquid urethane <br />resins and has limited effect on cured polyurethane. <br />• Clean up spills with adequate ventilation and appropriate <br />personal protective equipment. Cover the spill area with <br />absorbent material such as clay or vermiculite and transfer to <br />appropriate waste containers. Dispose of waste in accordance <br />with federal, state and local regulations. <br />Safety: <br />Refer to MSDS. Use rubber gloves and goggles during mixing <br />and application. Avoid contact with eyes and skin. After contact <br />with skin, wipe up excess liquid then wash with plenty of soap <br />and water. In case of eye contact, rinse immediately with plenty of <br />water and seek medical advice. Do not ingest. <br />KEEP OUT OF REACH OF CHILDREN. <br />LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a <br />period of one year from the date of installation to be manufactured <br />free of defects and to be consistent with its technical properties as <br />stated in our current Technical Data Sheet. This product must be <br />used as directed and within its stated shelf life. AQUAFIN INC. <br />will replace or at our discretion refund the purchase price of any <br />product, excluding cost of labor, which is proven to be defective. <br />Our product recommendations are based on industry standards and <br />testing procedures. It is the buyer’s obligation to test the suitability <br />of the product for an intended use prior to using it. We assume <br />no warranties written, expressed or implied as to any specific <br />methods of application or use of the product. AQUAFIN INC. <br />MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS <br />FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU <br />OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, <br />INC. shall not be liable for damages of any sort including remote <br />or consequential damages, down time, or delay. Any claim for a <br />defective product must be filed within 30 days of discovery of a <br />problem, and must be submitted with written proof of purchase. <br />For Professional Use Only.</p> <p>Check our website for the latest version of the Technical Datasheet. Only the current version is legally binding - and only for the intended market. In cases of <br />uncertainty contact our technical department for further information before starting any applications. <br />www.aquafin.net <br />Page 1 of 1</p> <p>(updated 06/10/14-EK)</p>
