TDS-InjectProECO-Combi_030921.pdf
2 Pages
94 KB
Download
<h1>TDS-InjectProECO-Combi_030921.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>InjectProECO-CombiGrout</p> <p>Hydrophobic, tough polyurethane grout for curtain grouting and void filling <br />No harmful phthalates <br />CSI Div. 03 <br />03 64 00 Injection Grouting</p> <p>Physical Properties <br />ECO <br />FRIENDLY <br />TECHNOLOGY</p> <p>Product Description: <br />InjectProECO-CombiGrout is a slightly flexible, tough, closed cell, <br />polyurethane injection grout designed for grouting into voids and <br />cracks. When it comes in contact with water, the grout expands and <br />quickly cures to a tough, flexible, closed-cell polyurethane foam that <br />is generally unaffected by common corrosive environments and is not <br />subject to shrinkage due to wet/dry cycles. InjectProECO grouts are all <br />environmentally friendly and formulated without harmful phthalates or <br />VOC’s.</p> <p>The system is comprised of an “A” component (base resin) and a “B” <br />component (accelerator). The “B” component is used by the applicator to <br />adjust the set times for various job site specific conditions. <br />Typical Applications: <br />Typical applications include filling voids and sealing cracks with differential <br />movement. <br />Advantages: <br />• Zero VOC’s - meets LEED criteria <br />• 100% solids, non-flammable, non-toxic permanent seal <br />• Hydrophobic - can be used in wet and dry environments <br />• Expansion up to 20 times (free foam) <br />• Accelerator and resin stable to -40°F (-40°C). <br />• Flexible and tough foam <br />• Pumped as a single component <br />• Adjustable reaction times <br />• Non-hazardous shipping <br />Reaction Times & Use of Accelerator: <br />The reaction time can be adjusted by the addition of accelerator “B” <br />into the base resin prior to pumping. The resulting profile is affected by <br />temperature and the amount of moisture present. <br />Typical reaction times: <br />Accelerator % <br />Reaction <br />Polymerisation <br />6% <br />30 seconds <br />115 seconds <br />8% <br />25 seconds <br />90 seconds <br />10% <br />20 seconds <br />75 seconds <br />Installation Procedures: <br />Refer to the Aquafin InjectPro Grouting Guideline for full instructions. Mix <br />both the resin (Component A) and accelerator (Component B) before <br />combining. <br />• Pour the desired amount of InjectProECO-CombiGrout Resin Component <br />A into a clean pail. <br />• Measure the appropriate amount of InjectProECO-ACCELERATORCCS Component B and pour into the InjectProECO-CombiGrout <br />Resin, stirring until adequately mixed. Never use more accelerator than <br />Check our website for the latest version of the Technical Data Sheet. <br />www.aquafin.net</p> <p>Liquid (un-cured) <br />Color <br />Viscosity (ASTM D-1638) <br />Specific Gravity <br />(ASTM D-1475)</p> <p>Flash Point (ASTM D-92)</p> <p>InjectProECOCombiGrout Resin</p> <p>InjectProECOACCELERATOR-CCS</p> <p>Dark Amber</p> <p>Clear</p> <p>250 cps</p> <p>25 cps</p> <p>10 lbs/Gal <br />(1.2 kg/L)</p> <p>7.9 lbs/Gal <br />(0.95 kg/L)</p> <p>>250°F (>120°C)</p> <p>225°F (107°C)</p> <p>Solid (cured) InjectProECO-CombiGrout <br />Density (ASTM D-1622)</p> <p>1 lbs/ft3 (~0.02 kg/dm3)</p> <p>Water Absorption (ASTM D-2842)</p> <p>< 1%</p> <p>Elongation</p> <p>60%</p> <p>recommended. Excess accelerator will cause significant expansion that <br />is prone to shrinkage. For faster reaction times please contact technical <br />services for information on InjectProECO-ACCELERATOR-CCS-FAST. <br />During injection, the grout will follow the path of least resistance. When <br />the material has stopped penetrating it will continue to expand against the <br />confines of the crack/joint and compress within itself, forming a very dense, <br />closed cell material stopping the leak. <br />Packaging: <br />InjectProECO-CombiGrout Resin: 5 gallon pails (19 L) <br />InjectProECO-ACCELERATOR-CCS: 32 oz. container (0.91 L) <br />(5% dosage per 5 gallons (19 L)of resin. For 10% acceleration use 2 x 32 <br />oz.) (2 x 0.91 L) <br />Storage & Shelf Life: <br />Shelf life is two years when stored properly. Product is highly moisture <br />sensitive. Store in original sealed containers at temperature between 40°F <br />– 90°F (4°C – 32°C). Opened containers must be handled properly to <br />prevent moisture contamination. <br />Limitations: <br />• Temperature significantly affects viscosity. Protect material from excessive <br />heating and cooling prior to grouting to avoid affecting viscosity. <br />• If using water baths to cool or heat pails avoid splashes to prevent <br />water coming in direct contact with resin - this will activate the reaction. <br />Do not warm material or packaging above 90°F (32°C). <br />• Do not reseal containers of contaminated materials as it can create <br />pressure. <br />• Clean up spills with adequate ventilation and appropriate personal <br />protective equipment. Cover the spill area with absorbent material <br />such as clay or vermiculite and transfer to metal waste containers. <br />Wash area with decontamination solution (5-10% solution of sodium <br />carbonate). Dispose of waste in accordance with federal, state and <br />local regulations. <br />Page 1 of 2</p> <p>(updated 03/09/21-EKJW)</p> <p>InjectProECO-CombiGrout <br />Note: <br />Proper application is the responsibility of the user. Field visits by AQUAFIN <br />personnel are for the purpose of making technical recommendations and <br />not for supervising or providing quality control on-site. <br />Safety: <br />Refer to SDS. For commercial use only. Avoid contact with skin and eyes. <br />Wear rubber gloves and safety goggles during mixing and application. <br />After contact with skin, wash with plenty of water. In case of eye contact, <br />rinse immediately with plenty of water for 15 minutes and seek medical <br />advice. KEEP OUT OF REACH OF CHILDREN. <br />LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year <br />from the date of installation to be manufactured free of defects and to be consistent <br />with its technical properties as stated in our current Technical Data Sheet. This product <br />must be used as directed and within its stated shelf life. AQUAFIN INC. will replace <br />or at our discretion refund the purchase price of any product, excluding cost of labor, <br />which is proven to be defective. Our product recommendations are based on industry <br />standards and testing procedures. It is the buyer’s obligation to test the suitability of <br />the product for an intended use prior to using it. We assume no warranties written, <br />expressed or implied as to any specific methods of application or use of the product. <br />AQUAFIN INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR <br />FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL <br />OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable <br />for damages of any sort including remote or consequential damages, down time, or <br />delay. Any claim for a defective product must be filed within 30 days of discovery of a <br />problem, and must be submitted with written proof of purchase.</p> <p>For Professional Use Only.</p> <p>Check our website for the latest version of the Technical Datasheet. Only the current version is legally binding - and only for the intended market. In cases of uncertainty contact <br />our technical department for further information before starting any applications. <br />www.aquafin.net <br />Page 2 of 2 <br />(updated 03/09/21-EKJW)</p>
