TDS-InjectProECO-CombiGrout_072924.pdf
2 Pages
100 KB
Download
<h1>TDS-InjectProECO-CombiGrout_072924.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />e: info@aquafin.net <br />e: technical@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>InjectProECO-CombiGrout</p> <p>Hydrophobic, tough polyurethane grout for curtain grouting and void filling <br />No harmful phthalates <br />CSI Div. 03 <br />03 64 00 Injection Grouting</p> <p>Physical Properties <br />ECO <br />FRIENDLY <br />TECHNOLOGY</p> <p>Product Description: <br />InjectProECO-CombiGrout is a slightly flexible, tough, closed cell, <br />polyurethane injection grout designed for grouting into voids and <br />cracks. When it comes in contact with water, the grout expands and <br />quickly cures to a tough, flexible, closed-cell polyurethane foam that <br />is generally unaffected by common corrosive environments and is not <br />subject to shrinkage due to wet/dry cycles. InjectProECO grouts are all <br />environmentally friendly and formulated without harmful phthalates or <br />VOC’s.</p> <p>The system is comprised of an “A” component (base resin) and a “B” <br />component (accelerator). The “B” component is used by the applicator to <br />adjust the set times for various job site specific conditions. <br />Typical Applications: <br />Typical applications include filling voids and sealing cracks with differential <br />movement. <br />Advantages: <br />• Zero VOC’s - meets LEED criteria <br />• 100% solids, non-flammable, non-toxic permanent seal <br />• Hydrophobic - can be used in wet and dry environments <br />• Expansion up to 27 times (free foam) <br />• Accelerator and resin stable to -40°F (-40°C) <br />• Flexible and tough foam <br />• Pumped as a single component <br />• Adjustable reaction times <br />• Non-hazardous shipping</p> <p>Liquid (un-cured)</p> <p>InjectProECOCombiGrout Resin</p> <p>InjectProECOACCELERATOR-UNI</p> <p>Dark Amber</p> <p>Yellow</p> <p>(ASTM D1638):</p> <p>158 cps</p> <p>35 cps</p> <p>Specific Gravity</p> <p>10 lbs/Gal <br />(1.2 kg/L)</p> <p>7.9 lbs/Gal <br />(0.95 kg/L)</p> <p>>250°F (>120°C)</p> <p>487.4°F (253°C)</p> <p>Color: <br />Viscosity</p> <p>(ASTM D1475):</p> <p>Flash Point <br />(ASTM D93):</p> <p>Solid (cured) InjectProECO-CombiGrout <br />Density <br />(ASTM D1622):</p> <p>1 lbs/ft3 (~0.02 kg/dm3)</p> <p>Water Absorption <br />(ASTM D-2842):</p> <p>< 1%</p> <p>Elongation:</p> <p>60%</p> <p>All data are average values obtained under laboratory conditions. Reaction times <br />tested in a 13.5 oz (400 ml) cup at 68°F (20°C).</p> <p>Reaction Times & Use of Accelerator: <br />The reaction time can be adjusted by the addition of accelerator “B” <br />into the base resin prior to pumping. The resulting profile is affected by <br />temperature and the amount of moisture present. <br />Typical Reaction Times <br />Percent (%) of <br />InjectProECO-ACCELERATOR-UNI</p> <p>Start of <br />Reaction</p> <p>End of <br />Reaction</p> <p>5%</p> <p>20 sec.</p> <p>1 min. 42 sec.</p> <p>7%</p> <p>13 sec.</p> <p>1 min. 23 sec.</p> <p>8%</p> <p>15 sec.</p> <p>1 min. 12 sec.</p> <p>10%</p> <p>13 sec.</p> <p>59 sec.</p> <p>Installation Procedures: <br />Refer to the current Aquafin Chemical Grout Handbook and please <br />contact Aquafin Technical Department or your local Aquafin <br />Representative for detailed grouting instructions. <br />Check our website for the latest version of the Technical Data Sheet. <br />www.aquafin.net</p> <p>• Mix both the resin (Component A) and accelerator (Component B) <br />before combining. <br />• Pour the desired amount of InjectProECO-CombiGrout Resin Component <br />A into a clean pail. <br />• Measure the appropriate amount of InjectProECO-ACCELERATORUNI Component B and pour into the InjectProECO-CombiGrout Resin, <br />stirring until adequately mixed. Never use more accelerator than <br />recommended. Excess accelerator will cause significant expansion that <br />is prone to shrinkage. For faster reaction times please ask your local <br />Aquafin Representative about InjectProECO-ACCELERATOR-CCS-FAST. <br />During injection, the grout will follow the path of least resistance. When <br />the material has stopped penetrating it will continue to expand against the <br />confines of the crack/joint and compress within itself, forming a very dense, <br />closed cell material stopping the leak. <br />Packaging: <br />InjectProECO-CombiGrout Resin: 5 gallon pails (19 L) <br />InjectProECO-ACCELERATOR-UNI: 32 oz. container (0.95 L) <br />(5% dosage per 5 gallons (19 L) of resin. For 10% acceleration use 2 x 32 <br />oz. (2 x 0.95 L) <br />Storage & Shelf Life: <br />Shelf life is two years when stored properly. Product is highly moisture <br />sensitive. Store in original sealed containers at temperature between 40°F <br />– 90°F (4°C – 32°C). Opened containers must be handled properly to <br />prevent moisture contamination. <br />Page 1 of 2</p> <p>(07/29/24-EKVBAC)</p> <p>InjectProECO-CombiGrout <br />Limitations: <br />• Temperature significantly affects viscosity. Protect material from excessive <br />heating and cooling prior to grouting to avoid affecting viscosity. <br />• If using water baths to cool or heat pails avoid splashes to prevent <br />water coming in direct contact with resin - this will activate the reaction. <br />Do not warm material or packaging above 90°F (32°C). <br />• Do not reseal containers of contaminated materials as it can create <br />pressure. <br />• Clean up spills with adequate ventilation and appropriate personal <br />protective equipment. Cover the spill area with absorbent material <br />such as clay or vermiculite and transfer to metal waste containers. <br />Wash area with decontamination solution (5 - 10% solution of sodium <br />carbonate). Dispose of waste in accordance with federal, state and <br />local regulations. <br />Note: <br />Proper application is the sole responsibility of the user. Applicators are <br />expected to follow ICRI and ACI guidelines as well as other applicable <br />industry standards. Aquafin personnel or representatives are not site <br />inspectors or construction project managers and therefore do not approve <br />surface preparation, mixing, or application of Aquafin products. Site visits <br />by Aquafin personnel or representatives are solely for the purpose of <br />making technical recommendations, not for providing supervision or quality <br />control.</p> <p>Safety: <br />Refer to SDS. For commercial use only. Avoid contact with skin and eyes. <br />Wear rubber gloves and safety goggles during mixing and application. <br />After contact with skin, wash with plenty of water. In case of eye contact, <br />rinse immediately with plenty of water for 15 minutes and seek medical <br />advice. KEEP OUT OF REACH OF CHILDREN. <br />LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year <br />from the date of installation to be manufactured free of defects and to be consistent <br />with its technical properties as stated in our current Technical Data Sheet. This product <br />must be used as directed and within its stated shelf life. AQUAFIN INC. will replace <br />or at our discretion refund the purchase price of any product, excluding cost of labor, <br />which is proven to be defective. Our product recommendations are based on industry <br />standards and testing procedures. It is the buyer’s obligation to test the suitability of <br />the product for an intended use prior to using it. We assume no warranties written, <br />expressed or implied as to any specific methods of application or use of the product. <br />AQUAFIN INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR <br />FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL <br />OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable <br />for damages of any sort including remote or consequential damages, down time, or <br />delay. Any claim for a defective product must be filed within 30 days of discovery of a <br />problem, and must be submitted with written proof of purchase.</p> <p>For Professional Use Only.</p> <p>General Information: <br />All details in particular to the suggestions for the processing and use of the <br />product is based on our present knowledge and experiences at the time <br />of printing. Depending on specific applications, in particular regarding <br />substrates, processing and environmental conditions may affect final results.</p> <p>Check our website for the latest version of the Technical Datasheet. Only the current version is legally binding - and only for the intended market. In cases of uncertainty contact <br />our technical department for further information before starting any applications. <br />www.aquafin.net <br />Page 2 of 2 <br />(07/29/24-EKVBAC)</p>
