Product Guide - Mortars_2020.pdf
2 Pages
5.09 MB
Download
<h1>Product Guide - Mortars_2020.pdf</h1> <p>CONCRETE REPAIR <br />High performance repair mortars, versatile enough to tackle any job</p> <p>www.aquafin.net</p> <p>Concrete repair <br />Concrete deteriorates over time as it is exposed to the elements, freeze/thaw cycles, submerged or <br />in contact with water and subjected to abrasion and other factors. AQUAFIN Inc. has been in the <br />waterproofing and concrete repair market for more than 30 years and offers an advanced full systems <br />approach to concrete repair and restoration. <br />MORTAR-Crete-CI <br />Fully extended, pourable/pumpable, concrete mix with integral <br />corrosion inhibitor <br />• Factory blended, quality controlled mix design <br />• Excellent workability with long application time <br />• Very easy to use on “form and pour” applications <br />• Pre-extended: Eliminates risk of reactive aggregate</p> <p>MORTAR-40 CI <br />One-component, cementitious, pumpable structural repair mortar <br />• Up to 1.5” (40 mm) vertical application per layer <br />• Up to 4” (100 mm) horizontal application per layer <br />• Shrinkage compensated <br />• Can be used for “form and pour” applications <br />• NSF/ANSI 61 potable water certified by WQA</p> <p>MORTAR-Screed CI <br />One-part, polymer-modified, concrete screed and repair mortar <br />with integral corrosion inhibitor <br />• For screed repairs and overlays up to 5” neat <br />• Fiber reinforced <br />• Low shrinkage <br />• Wide consistency range from semi-dry to plastic</p> <p>MORTAR-V/O CI <br />One-component, non-sag, vertical and overhead <br />concrete repair mortar with integral corrosion inhibitor <br />• Up to 2” (50 mm) without forming <br />• Very low sag - excellent “hang” characteristics <br />• Low shrinkage <br />• Excellent workability - can be sculpted and shaved with ease</p> <p>MORTAR-QuickPatch <br />One-component, rapid setting horizontal patching mortar and <br />resurfacer <br />• Featheredge to 3” (75mm) <br />• Natural gray to blend with existing concrete <br />• For interior and exterior use <br />• Outstanding workability and ease of placement <br />• Fast setting</p> <p>MORTAR-LN <br />Universal waterproofing, repairing and lining mortar <br />• Polymer modified <br />• Waterproof at 1/4“ thick <br />• NSF/ANSI 61 potable water certified by WQA <br />• Trowel or spray application</p> <p>REBAR PRIMER/BOND-CI <br />Cementitious bonding agent with integral corrosion inhibitor <br />• Single component - mixes with water only <br />• Extended pot life and contact time <br />• Resistant to penetration of water and chlorides <br />• Extended contact time allowing for repair mortars up to 3 days <br />after application</p> <p>Full System Approach: Protect your repairs with AQUAFIN-1K and <br />AQUAFIN-2KM cementitious waterproof coatings <br />AQUAFIN-1K: single component, polymer modified, waterproof and protective <br />coating resistant to negative side hydrostatic pressure. <br />AQUAFIN-2K/M: two-component, flexible, protective and waterproof coating, <br />with up to 70% elongation, able to withstand one-time substrate movement and <br />bridge cracks up to 1/16”.</p> <p>031220EK</p> <p>Crystalline Enhanced Technology <br />MORTAR-IC <br />One-component, fast setting waterproof repair <br />and sealing mortar</p> <p>PLUG-IC <br />Fast setting, cementitious waterstop and patching <br />mortar</p> <p>MORTAR-Crete-Crystalline <br />Fully extended, pourable/pumpable, <br />concrete mix</p> <p>Aquafin‘s advanced crystalline technology, which actively works with the free lime in cement to grow crystals throughout the concrete capillary structure, <br />greatly reduces the passage of moisture through the repair material. This active crystalline reaction will continue to occur for the life of the repair, as long as <br />water is present. Aquafin has a full line of crystalline enhanced repair mortars to complement the AQUAFIN-IC crystalline coating system.</p>
