Waterproof & Protective Coatings Concrete Restoration Moisture Vapor Mitigation & Self-Leveling Underlayments & Toppings Injection Grouting
Product Guide:
Moisture Vapor Mitigation
Moisture Vapor Reduction Systems The VAPORTIGHT COAT®-SG products reduce water vapor emission levels of up to 25 lbs/1000 ft2·24 h (5 g/m2·h) and RH 1 of 100% to well below accepted levels for subsequent application of flooring systems such as epoxies, vinyl tiles, sheet vinyl, carpets, wood flooring, etc.
WHAT
WHYdo VAPORTIGHT COAT -SG products work so well?
is unique about VAPORTIGHT COAT®-SG products?
VAPORTIGHT COAT®-SG2 Oil & Vapor Barrier A 2-component, moisture tolerant, extremely high-density epoxy based product which prevents the passage of water vapor and moisture through slabs on or below grade, thus eliminating delamination of adhesives, floor coverings, coatings and hot applied roofing membranes. It is a full broadcast system that can also be used to treat oil contaminated slabs as it prevents capillary infiltration of oil and other chemicals from the ground. When time is of the essence SG ACCELERATOR can be used to significantly increase cure time, allowing the application of floor coatings in a little as 2 – 3 hours.
®
VAPORTIGHT COAT®-SG combines an unusually wide variety of advantages in a unique product line:
VAPORTIGHT COAT®-SG3 Vapor Barrier A 2-component, 100% solids, moisture tolerant, epoxy product which prevents the passage of water vapor and moisture through slabs on or below grade, thus eliminating delamination of adhesives, floor coverings, roofing membranes and coatings. It is a non-broadcast system that can be applied in one coat for most applications.
• Easy to apply – one coat application
• Moisture tolerant
• Functions as negative side waterproofing
• High chemical resistance
• Provides good bonding for additional top coatings such as adhesives, epoxies, self levelers and roofing membranes
• Excellent adhesion to damp substrates • Good adhesion after freeze/thaw cycling
When time is of the essence SG ACCELERATOR can be used to significantly increase cure time, allowing the application of floor coatings in a little as 4 – 5 hours.
WHERE
Broadcast #20 mesh (0.5 – 1.0 mm) sand
Oil & vapor barrier VAPORTIGHT COAT®-SG2
• Vapor barrier
are VAPORTIGHT COAT®-SG products typically applied?
TYPICAL AREAS OF APPLICATION: Concrete slabs on, below or above grade such as: Vapor barrier VAPORTIGHT COAT®-SG3
• Industrial/retail facilities
• Field houses
• Hangars
• Office buildings
• Running tracks (indoor/outdoor)
• Warehouses
• Hospitals and schools
• Concrete roof decks
Degreased concrete
TYPICAL APPLICATIONS: • Concrete slabs with missing or damaged vapor barriers
Oil contaminated concrete
• Oil contaminated concrete substrates (SG2 only)
• Fast track construction schedules – 5 day old concrete slabs • New concrete slabs with excessive moisture content to receive a flooring or coating
Full System Solutions
additional Aquafin offerings...
Self-Leveling Underlayments Projects requiring VAPORTIGHT COAT moisture mitigation solutions often require a cementitious cap or barrier to be installed as the substrate for the final floor solution. Aquafin has a full line of self-leveling underlayments and additional components to complete any job. LEVEL-Ultra Moisture tolerant, indoor/outdoor, calcium aluminate, cementitious self-leveling underlayment • High strength • Walk on within 4 hours; install most floor coverings within 16 - 24 hours • Installs from 1/8” - 1-1/4” (3 - 31.5 mm) • Compatible with radiant floor heating FAST TRACK! As a system, the VAPORTIGHT COAT-SG3 and LEVEL-Ultra can significantly speed up construction schedules and provide significant cost savings.
Further Products: LEVEL-One, LEVEL-Patch-FF, SLU-Primer, EPOXY-Primer and more!
AQUAFIN, Inc. Triumph Industrial Park 505 Blue Ball Rd., #160 Elkton, MD 21921 Toll Free: 1-866-AQUAFIN web: www.aquafin.net Download our App today!
Aquafin, Inc. is a member of the SCHOMBURG Group