SDS_RE-ROOF Colored Urethane Top Coat HS_122822.pdf
10 Pages
1.84 MB
Download
<h1>SDS_RE-ROOF Colored Urethane Top Coat HS_122822.pdf</h1> <p>Safety Data Sheet (SDS)</p> <p>Page 1/10</p> <p>OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.</p> <p>Printing date 12/28/2022</p> <p>Reviewed on 12/28/2022</p> <p>SECTION 1) CHEMICAL PRODUCT AND MANUFACTURER'S IDENTIFICATION</p> <p>IDENTITY:</p> <p>Product Name: RE-ROOF Colored Urethane Top Coat HS <br />Product Use Description:</p> <p>AQUAFIN, INC. <br />505 BLUE BALL RD. #160 <br />ELKTON, MD 21921</p> <p>Urethane-based Liquid Roof Coating, For Further Information, Refer to the <br />Product Technical Data Sheet.</p> <p>info@aquafin.net</p> <p>24 hr Emergency Phone: Chem-Tel (800) 255-3924 <br />Information Phone No: (410) 392-2300</p> <p>www.aquafin.net</p> <p>SECTION 2) HAZARDS IDENTIFICATION <br />Classification <br />Aspiration Hazard - Category 1 <br />Carcinogenicity - Category 1B <br />Eye Irritation - Category 2A <br />Flammable Liquids - Category 3 <br />Germ Cell Mutagenicity - Category 1B <br />Respiratory Sensitizer (Solid/Liquid) - Category 1 <br />Skin Irritation - Category 3 <br />Skin Sensitizer - Category 1 <br />Specific Target Organ Toxicity - Repeated Exposure - Category 2</p> <p>Pictograms</p> <p>Signal Word <br />Danger</p> <p>Hazardous Statements - Physical <br />H226 - Flammable liquid and vapor</p> <p>Hazardous Statements - Health <br />H304 - May be fatal if swallowed and enters airways <br />H350 - May cause cancer. <br />H319 - Causes serious eye irritation <br />H340 - May cause genetic defects. <br />H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 1 of 10</p> <p>H316 - Causes mild skin irritation <br />H317 - May cause an allergic skin reaction <br />H373 - May cause damage to organs through prolonged or repeated exposure.</p> <p>Precautionary Statements - General <br />P101 - If medical advice is needed, have product container or label at hand. <br />P102 - Keep out of reach of children. <br />P103 - Read label before use.</p> <p>Precautionary Statements - Prevention <br />P201 - Obtain special instructions before use. <br />P202 - Do not handle until all safety precautions have been read and understood. <br />P280 - Wear protective gloves/protective clothing/eye protection/face protection. <br />P264 - Wash thoroughly after handling. <br />P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. <br />P233 - Keep container tightly closed. <br />P240 - Ground/bond container and receiving equipment. <br />P241 - Use explosion-proof [electrical/ventilating/lighting/...] equipment. <br />P242 - Use only non-sparking tools. <br />P243 - Take action to prevent static discharges. <br />P261 - Avoid breathing dust/fume/gas/mist/vapors/spray. <br />P284 - [In case of inadequate ventilation] wear respiratory protection. <br />P272 - Contaminated work clothing should not be allowed out of the workplace. <br />P260 - Do not breathe dust/fume/gas/mist/vapors/spray.</p> <p>Precautionary Statements - Response <br />P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. <br />P331 - Do NOT induce vomiting. <br />P308 + P313 - IF exposed or concerned: Get medical advice/attention. <br />P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. <br />Continue rinsing. <br />P337 + P313 - If eye irritation persists: Get medical advice/attention. <br />P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. <br />P370 + P378 - In case of fire: Use dry chemical, carbon dioxide, foam to extinguish. <br />For detailed information, see Section-5 (Fire Fighting Measures) <br />P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. <br />P342 + P311 - If experiencing respiratory symptoms: Call a POISON CENTER/doctor. <br />P332 + P313 - If skin irritation occurs: Get medical advice/attention. <br />P302 + P352 - IF ON SKIN: Wash with plenty of water. <br />P333 + P313 - If skin irritation or a rash occurs: Get medical advice/attention. <br />P321 - Specific treatment (see section 4 on this SDS). <br />P362 + P364 - Take off contaminated clothing. And wash it before reuse. <br />P314 - Get Medical advice/attention if you feel unwell.</p> <p>Precautionary Statements - Storage <br />P405 - Store locked up. <br />P403 + P235 - Store in a well-ventilated place. Keep cool.</p> <p>Precautionary Statements - Disposal <br />P501 - Dispose of contents/ container to an approved waste disposal plant.</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 2 of 10</p> <p>SECTION 3) COMPOSITION/INFORMATION ON INGREDIENTS <br />CAS</p> <p>Chemical Name</p> <p>% By Weight</p> <p>0053880-05-0</p> <p>POLYURETHANE PREPOLYMER</p> <p>34% - 63%</p> <p>0064742-95-6</p> <p>AROMATIC HYDROCARBON MIXTURE >C9</p> <p>14% - 25%</p> <p>0013463-67-7</p> <p>TITANIUM DIOXIDE</p> <p>9% - 16%</p> <p>0014808-60-7</p> <p>SILICA, CRYSTALLINE</p> <p>8% - 15%</p> <p>0000123-86-4</p> <p>N-BUTYL ACETATE</p> <p>1.3% - 2%</p> <p>0001333-86-4</p> <p>CARBON BLACK</p> <p>0.6% - 1.1%</p> <p>0004098-71-9</p> <p>ISOPHORONE DIISOCYANATE</p> <p>0.1% - 0.2%</p> <p>Specific chemical identity and/or exact percentage (concentration) of the composition has been withheld to protect confidentiality.</p> <p>SECTION 4) FIRST-AID MEASURES <br />Inhalation <br />Remove source of exposure or move person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a <br />POISON CENTER/doctor. If breathing is difficult, trained personnel should administer emergency oxygen if advised to do so by the <br />POISON CENTER/doctor. <br />If exposed/feel unwell/concerned: Call a POISON CENTER/doctor. <br />Eliminate all ignition sources if safe to do so.</p> <p>Skin Contact <br />Take off contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Gently blot or brush away excess product. Wash with <br />plenty of lukewarm, gently flowing water for a duration of 15-20 minutes. If skin irritation or rash occurs: Get medical advice/attention. <br />Wash contaminated clothing before re-use or discard. <br />IF exposed or concerned: Get medical advice/attention.</p> <p>Eye Contact <br />Avoid direct contact. Wear chemical protective gloves, if necessary. <br />Rinse eyes cautiously with lukewarm, gently flowing water for several minutes, while holding the eyelids open. Remove contact lenses, if <br />present and easy to do. Continue rinsing for 15-20 minutes. Take care not to rinse contaminated water into the unaffected eye or onto the <br />face. If eye irritation persists: Get medical advice/attention.</p> <p>Ingestion <br />Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. If vomiting occurs naturally, lie on your side, in the <br />recovery position. <br />IF exposed or concerned: Get medical advice/attention.</p> <p>SECTION 5) FIRE-FIGHTING MEASURES <br />Suitable Extinguishing Media <br />Dry chemical, foam, carbon dioxide is recommended. Water spray is recommended to cool or protect exposed materials or structures. <br />Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces. Simultaneous use of foam and water <br />on the same surface is to be avoided as water destroys the foam. Sand or earth may be used for small fires only.</p> <p>Unsuitable Extinguishing Media <br />If water is used, use very large quantities of cold water. The reaction between water and hot isocyanate may be vigorous.</p> <p>Specific Hazards in Case of Fire <br />Vapors may accumulate and travel to ignition sources distant from the handling site; flash fire can occur. <br />Excessive pressure or temperature may cause explosive rupture of containers. <br />Water contamination will produce carbon dioxide. Do not reseal contaminated containers as pressure buildup may rupture them.</p> <p>Fire-fighting Procedures</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 3 of 10</p> <p>Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged <br />containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and to <br />protect personnel. Water may be ineffective but can be used to cool containers exposed to heat or flame. Caution should be exercised <br />when using water or foam as frothing may occur, especially if sprayed into containers of hot, burning liquid. <br />Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.</p> <p>Special Protective Actions <br />Wear NIOSH approved self-contained breathing apparatus in positive pressure mode with full-face piece. Boots, gloves (neoprene), <br />goggles, and full protective clothing are also required. <br />Care should always be exercised in dust/mist areas.</p> <p>SECTION 6) ACCIDENTAL RELEASE MEASURES <br />Emergency Procedure <br />ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). <br />Do not touch or walk through spilled material. <br />Isolate hazard area and keep unnecessary people away. Remove all possible sources of ignition in the surrounding area. Notify <br />authorities if any exposure to the general public or the environment occurs or is likely to occur. <br />If spilled material is cleaned up using a regulated solvent, the resulting waste mixture may be regulated.</p> <p>Recommended Equipment <br />Appropriate dust or face mask to eliminate breathing foam dust particulates.</p> <p>Personal Precautions <br />Avoid breathing vapors. Avoid contact with skin, eyes or clothing. Do not touch damaged containers or spilled materials unless wearing <br />appropriate protective clothing.</p> <p>Environmental Precautions <br />Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage <br />systems and natural waterways by using sand, earth, or other appropriate barriers.</p> <p>Methods and Materials for Containment and Cleaning up <br />Cover container, but do not seal, and remove from work area. Prepare a decontamination solution of 2.0% liquid detergent and 3-8% <br />concentrated ammonium hydroxide in water (5-10% sodium carbonate may be substituted for the ammonium hydroxide). Follow the <br />precautions on the supplier's safety data sheets. <br />Treat the spill area with the decontamination solution, using about 10 parts of the solution for each part of the spill, and allow it to react for <br />at least 15 minutes. Carbon dioxide will be evolved, leaving insoluble polyureas. Residues from spill cleanup, even when treated as <br />described may continue to be regulated under provisions of RCRA and require storage and disposal as hazardous waste. <br />Slowly stir the isocyanate waste into the decontamination solution described above. Let stand for 48 hours, allowing the evolved carbon <br />dioxide to vent away, residues may still be subject to RCRA storage and disposal requirements. Dispose off in compliance with all <br />relevant local, state, and federal laws and regulations regarding treatment.</p> <p>SECTION 7) HANDLING AND STORAGE <br />General <br />Wash hands after use. <br />Do not get in eyes, on skin or on clothing. <br />Do not breathe vapors or mists. <br />Use good personal hygiene practices. <br />Eating, drinking and smoking in work areas is prohibited. <br />Remove contaminated clothing and protective equipment before entering eating areas.</p> <p>Ventilation Requirements <br />Use only with adequate ventilation to control air contaminants to their exposure limits. The use of local ventilation is recommended to <br />control emissions near the source.</p> <p>Storage Room Requirements <br />Keep container(s) tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight, strong <br />oxidizers and any incompatibilities. Store in approved containers and protect against physical damage. Keep containers securely sealed <br />when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be <br />carefully resealed to prevent leakage. Empty container retain residue and may be dangerous.</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 4 of 10</p> <p>Use non-sparking ventilation systems, approved explosion-proof equipment and intrinsically safe electrical systems in areas where this <br />product is used and stored. <br />Ground and bond containers and receiving equipment. Avoid static electricity by grounding. <br />Do not cut, drill, grind, weld, or perform similar operations on or near containers. Do not pressurize containers to empty them. Ground all <br />structures, transfer containers and equipment to conform to the national electrical code. Use procedures that prevent static electrical <br />sparks. Static electricity may accumulate and create a fire hazard.</p> <p>SECTION 8) EXPOSURE CONTROLS/PERSONAL PROTECTION <br />Eye Protection <br />Wear eye protection with side shields or goggles. Wear indirect-vent, impact and splash resistant goggles when working with liquids. If <br />additional protection is needed for entire face, use in combination with a face shield.</p> <p>Skin Protection <br />Use of gloves approved to relevant standards made from the following materials may provide suitable chemical protection: PVC, <br />neoprene or nitrile rubber gloves. Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, <br />chemical resistance of glove material, glove thickness, dexterity. Always seek advice from glove suppliers. Contaminated gloves should <br />be replaced. Use of an apron and over- boots of chemically impervious materials such as neoprene or nitrile rubber is recommended to <br />avoid skin sensitization. The type of protective equipment must be selected according to the concentration and amount of the dangerous <br />substance at the specific workplace. Launder soiled clothes or properly disposed of contaminated material, which cannot be <br />decontaminated. <br />Depending on conditions of use, additional protection may be required such as apron, arm covers, or full body suit. <br />Wash contaminated clothing before re-wearing.</p> <p>Respiratory Protection <br />If airborne concentrations exceed or are expected to exceed the TLV, use MSHA/NIOSH approved positive pressure supplied pressure <br />supplied air respiratory with a full face piece or an air supplied hood. For emergencies, use a positive pressure self-contained breathing <br />apparatus. Air purifying (cartridge type) respirators are not approved for protection against isocyanates.</p> <p>Appropriate Engineering Controls <br />Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold <br />limit value. <br />Chemical Name</p> <p>AROMATIC <br />HYDROCARBON <br />MIXTURE >C9</p> <p>OSHA <br />TWA <br />(ppm)</p> <p>OSHA <br />TWA <br />(mg/m3)</p> <p>500</p> <p>2000</p> <p>1</p> <p>3.5</p> <p>1</p> <p>CARBON BLACK</p> <p>OSHA <br />STEL <br />(ppm)</p> <p>OSHA <br />STEL <br />(mg/m3)</p> <p>OSHA <br />OSHA <br />NIOSH <br />Tables (Z1, OSHA <br />Skin <br />TWA <br />Z2, Z3) Carcinogen designation <br />(ppm)</p> <p>ISOPHORONE <br />DIISOCYANATE <br />N-BUTYL ACETATE <br />SILICA, <br />CRYSTALLINE</p> <p>150</p> <p>710</p> <p>1</p> <p>a</p> <p>[10 mg/m3 <br />percent <br />SiO2+2 / <br />250 <br />percent <br />SiO2+5 <br />mppcf]; [30 <br />mg/m3 <br />percent <br />SiO2+2];</p> <p>[1,3]; [3];</p> <p>15</p> <p>1</p> <p>TITANIUM DIOXIDE</p> <p>Chemical Name</p> <p>ACGIH <br />TWA <br />(ppm)</p> <p>ACGIH <br />TWA <br />(mg/m3)</p> <p>ACGIH <br />STEL <br />(ppm)</p> <p>NIOSH <br />TWA <br />(mg/m3)</p> <p>NIOSH <br />STEL <br />(ppm)</p> <p>NIOSH <br />STEL <br />(mg/m3)</p> <p>3.5a</p> <p>1</p> <p>0.005</p> <p>0.045</p> <p>0.02</p> <p>0.180</p> <p>150</p> <p>710</p> <p>200</p> <p>950</p> <p>0.05e</p> <p>b</p> <p>NIOSH <br />Carcinogen</p> <p>1</p> <p>1</p> <p>ACGIH <br />STEL <br />(mg/m3)</p> <p>AROMATIC <br />HYDROCARBON <br />MIXTURE >C9</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 5 of 10</p> <p>CARBON BLACK</p> <p>3 (I)</p> <p>ISOPHORONE <br />DIISOCYANATE</p> <p>0.005</p> <p>N-BUTYL ACETATE</p> <p>0.045</p> <p>50</p> <p>SILICA, <br />CRYSTALLINE</p> <p>150 <br />0.025 (R)</p> <p>TITANIUM DIOXIDE</p> <p>10</p> <p>(I) - Inhalable fraction, (R) - Respirable fraction</p> <p>SECTION 9) PHYSICAL AND CHEMICAL PROPERTIES <br />Physical and Chemical Properties <br />Density</p> <p>9.69 lb/gal</p> <p>Specific Gravity</p> <p>1.16</p> <p>VOC Regulatory</p> <p>1.88 lb/gal</p> <p>VOC Part A & B Combined</p> <p>N.A.</p> <p>Appearance</p> <p>Pigmented Thin Liquid</p> <p>Odor Threshold</p> <p>N.A.</p> <p>Odor Description</p> <p>Aromatic</p> <p>pH</p> <p>N.A.</p> <p>Water Solubility</p> <p>Reacts with Water</p> <p>Flammability</p> <p>N/A</p> <p>Flash Point Symbol</p> <p>N.A.</p> <p>Flash Point</p> <p>45 °C</p> <p>Viscosity</p> <p>N.A.</p> <p>Lower Explosion Level</p> <p>N.A.</p> <p>Upper Explosion Level</p> <p>N.A.</p> <p>Vapor Pressure</p> <p>N.A.</p> <p>Vapor Density</p> <p>Heavier than air</p> <p>Freezing Point</p> <p>N.A.</p> <p>Melting Point</p> <p>N.A.</p> <p>Low Boiling Point</p> <p>120 °C</p> <p>High Boiling Point</p> <p>N.A.</p> <p>Auto Ignition Temp</p> <p>N.A.</p> <p>Decomposition Pt</p> <p>N.A.</p> <p>Evaporation Rate</p> <p>Slower than ether</p> <p>Coefficient Water/Oil</p> <p>N.A.</p> <p>SECTION 10) STABILITY AND REACTIVITY <br />Stability <br />Material is stable at standard temperature and pressure.</p> <p>Conditions to Avoid</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 6 of 10</p> <p>Heat, high temperature, open flame, sparks, and moisture. Contact with incompatible materials in a closed system will cause liberation of <br />carbon dioxide and buildup of pressure.</p> <p>Hazardous Reactions/Polymerization <br />Will not occur under normal conditions but under high temperatures in the presence of alkalis,tertiary amines, and metal compounds will <br />accelerate polymerization. Possible evolution of carbon dioxide gas may rupture closed containers.</p> <p>Incompatible Materials <br />This product will react with any material containing active hydrogens, such as water, alcohol, ammonia, amines, alkalis and acids, the <br />reaction with water is slow under 50°C, but is accelerated at higher temperature and in the presence of alkalis, tertiary amines, and metal <br />compounds. Some reactions can be violent. Material can react with strong oxidizing agents.</p> <p>Hazardous Decomposition Products <br />Carbon dioxide, carbon monoxide, nitrogen oxides, trace amounts of hydrogen cyanide and unidentified organic compounds may be <br />formed during combustion.</p> <p>SECTION 11) TOXICOLOGICAL INFORMATION <br />Skin Corrosion/Irritation <br />Isocyanates react with skin protein and moisture and can cause irritation. Prolonged contact can cause reddening, swelling, rash, scaling, <br />blistering, and, in some cases, skin sensitization. Individuals who have developed a skin sensitization can develop these symptoms as a <br />result of contact with very small amounts of liquid material or as a result of exposure to vapor. <br />Causes mild skin irritation</p> <p>Serious Eye Damage/Irritation <br />Liquid, aerosols or vapors are severely irritating and can cause pain, tearing, reddening and swelling. Prolonged vapor contact may cause <br />conjunctivitis. Any level of contact should not be left untreated. <br />Causes serious eye irritation</p> <p>Respiratory/Skin Sensitization <br />May cause allergy or asthma symptoms or breathing difficulties if inhaled <br />May cause an allergic skin reaction</p> <p>Carcinogenicity <br />May cause cancer.</p> <p>Germ Cell Mutagenicity <br />May cause genetic defects.</p> <p>Reproductive Toxicity <br />No data available</p> <p>Specific Target Organ Toxicity - Single Exposure <br />No data available</p> <p>Specific Target Organ Toxicity - Repeated Exposure <br />May cause damage to organs through prolonged or repeated exposure.</p> <p>Aspiration Hazard <br />May be fatal if swallowed and enters airways</p> <p>Acute Toxicity <br />No data available</p> <p>Potential Health Effects - Miscellaneous <br />0000123-86-4 N-BUTYL ACETATE <br />May cause abnormal liver function. The following medical conditions may be aggravated by exposure: respiratory system. Tests for <br />embryotoxic activity in animals has been inconclusive. Rats exposed to very high airborne levels have exhibited high frequency hearing <br />deficits. The significance of this to man is unknown. Has been toxic to the fetus in laboratory animals at doses that are toxic to the mother. <br />0001333-86-4 CARBON BLACK <br />Is an IARC, NTP or OSHA carcinogen. Has shown carcinogenic activity in laboratory animals at high doses. Significance to man is <br />unknown. The following medical conditions may be aggravated by exposure: asthma, respiratory disease. WARNING: This chemical is <br />known to the State of California to cause cancer.</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 7 of 10</p> <p>0013463-67-7 TITANIUM DIOXIDE <br />Is an IARC, NTP or OSHA carcinogen. In a lifetime inhalation test, lung cancers were found in some rats exposed to 250 mg/m3 <br />respirable titanium dust. Analysis of the titanium dioxide concentrations in the rat’s lungs showed that the lung clearance mechanism was <br />overwhelmed and that the results at the massive 250 mg/m3 level are not relevant to the workplace.‘Results of a DuPont epidemiology <br />study showed that employees who had been exposed to Titanium Dioxide were at no greater risk of developing lung cancer than were <br />employees who had not been exposed to Titanium dioxide. No pulmonary fibrosis was found in any of the employees and no association <br />was observed between Titanium dioxide exposure and chronic respiratory disease or x-ray abnormalities. Based on the results of this <br />study DuPont concludes that titanium dioxide will not cause lung cancer or chronic respiratory disease in humans at concentrations <br />experienced in the workplace.‘ <br />0014808-60-7 SILICA, CRYSTALLINE <br />Is an IARC, NTP or OSHA carcinogen. Repeated overexposure to crystalline silica may lead to x-ray changes and chronic lung disease. <br />Inhalation of high dust concentrations may cause: breathing difficulties, lung injury. WARNING: This chemical is known to the State of <br />California to cause cancer. <br />0064742-95-6 AROMATIC HYDROCARBON MIXTURE >C9 <br />The following medical conditions may be aggravated by exposure: skin disorders. Laboratory studies with rats have shown that petroleum <br />distillates can cause kidney damage and kidney or liver tumors. These effects were not seen in similar studies with guinea pigs, dogs, or <br />monkeys. Several studies evaluating petroleum workers have not shown a significant increase of kidney damage or an increase in kidney <br />or liver tumors.</p> <p>Chronic Exposure <br />0001333-86-4 CARBON BLACK <br />CARCINOGENIC EFFECTS: In 1996, the IARC reevaluated Carbon Black as a Group 2B carcinogen. This evaluation is given to carbon <br />black for which there is inadequate human evidence, but sufficient animal evidence. <br />Prolonged inhalation of Carbon black can result in lung disease. Symptoms include coughing, shortness of breath, wheezing and reduced <br />pulmonary function. <br />0014808-60-7 SILICA, CRYSTALLINE <br />Prolonged inhalation of respirable crystalline silica dust can result in lung disease (i.e. silicosis and/or lung cancer). Symptoms include <br />coughing, shortness of breath, wheezing and reduced pulmonary function.</p> <p>0004098-71-9</p> <p>ISOPHORONE DIISOCYANATE</p> <p>LC50 (rat): 123-160 mg/m3 (13.6-17.6 ppm) (4-hour exposure) (aerosol) (1,2) <br />LD50 (oral, male rat): greater than 2,500 mg/kg (1) <br />LD50 (oral, male mouse): greater than 2,500 mg/kg (1) <br />LD50 (dermal, male rat): approx. 1,000 mg/kg (4-hour exposure); approx. 500 mg/kg (4-day exposure) (1) <br />0001333-86-4</p> <p>CARBON BLACK</p> <p>LC50 (rat): 6750 mg/m3 (4-hour exposure); cited as 27000 mg/m3 (27 mg/L) (1-hour exposure) (3) <br />0000123-86-4</p> <p>N-BUTYL ACETATE</p> <p>LC50 (rat): 1802 mg/m3; 4-hour exposure (aerosol)(9) Note: A lower LC50 (aerosol) value of 760 mg/m3 (160 ppm); 4-hour exposure has <br />been reported.(11,27) Extensive research has failed to confirm this value. <br />LD50 (oral, rat): 10770 mg/kg (12, unconfirmed) <br />LD50 (oral, mouse): 7100 mg/kg (5) <br />LD50 (oral, rabbit): 7400 mg/kg (cited as 64 millimols/kg) (13) <br />LD50 (dermal, rabbit): Greater than 5000 mg/kg (3, unconfirmed)</p> <p>SECTION 12) ECOLOGICAL INFORMATION <br />Toxicity <br />No data available. <br />No data available</p> <p>Other Adverse Effects <br />No data available.</p> <p>Persistence and Degradability <br />0001333-86-4 CARBON BLACK <br />Carbon Black's insolubility in water results in it not being biodegradable in any medium or by biota. It is considered persistent in the</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 8 of 10</p> <p>natural environment.</p> <p>Bio-accumulative Potential <br />0001333-86-4 CARBON BLACK <br />A relevant bioaccumulation potential of carbon black is not expected based on its insolubility in organic solvents and in water. <br />Furthermore, since the aggregate diameter of carbon black varies between 80 nm and 810 nm, bioaccumulation of particulate carbon <br />black is not likely oweing to the large diameter of the solid aggregate particles.</p> <p>SECTION 13) DISPOSAL CONSIDERATIONS <br />Waste Disposal <br />Under RCRA, it is the responsibility of the user of the product, to determine a the time of disposal whether the product meets RCRA <br />criteria for hazardous waste. Waste management should be in full compliance with federal, state, and local laws. <br />Empty containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld or use for any <br />other purposes. Return drums to reclamation centers for proper cleaning and reuse.</p> <p>SECTION 14) TRANSPORT INFORMATION <br />U.S. DOT Information <br />Not regulated.</p> <p>IMDG Information <br />UN/NA #: 1263 <br />UN Proper Shipping Name: PAINT <br />Hazard Class: 3 <br />Packing Group: III <br />Placard: Flammable <br />Marine Pollutant: No data available</p> <p>IATA Information <br />UN/NA #: 1263 <br />UN Proper Shipping Name: PAINT <br />Hazard Class: 3 <br />Packing Group: III <br />Placard: Flammable</p> <p>SECTION 15) REGULATORY INFORMATION</p> <p>CAS</p> <p>Chemical Name</p> <p>% By Weight</p> <p>Regulation List</p> <p>0053880-05-0</p> <p>POLYURETHANE <br />PREPOLYMER</p> <p>34% - 63%</p> <p>DSL,SARA312,TSCA</p> <p>0064742-95-6</p> <p>AROMATIC <br />HYDROCARBON <br />MIXTURE >C9</p> <p>14% - 25%</p> <p>DSL,SARA312,VOC,TSCA</p> <p>0013463-67-7</p> <p>TITANIUM DIOXIDE</p> <p>9% - 16%</p> <p>DSL,SARA312,TSCA,CA_Prop65 - California Proposition 65</p> <p>0014808-60-7</p> <p>SILICA, CRYSTALLINE</p> <p>8% - 15%</p> <p>DSL,SARA312,TSCA,CA_Prop65 - California Proposition 65</p> <p>0000123-86-4</p> <p>N-BUTYL ACETATE</p> <p>1.3% - 2%</p> <p>DSL,CERCLA,SARA312,VOC,TSCA</p> <p>0001333-86-4</p> <p>CARBON BLACK</p> <p>0.6% - 1.1%</p> <p>DSL,SARA312,TSCA,CA_Prop65 - California Proposition 65</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 9 of 10</p> <p>0001333-86-4</p> <p>CARBON BLACK</p> <p>0.6% - 1.1%</p> <p>DSL,SARA312,TSCA,CA_Prop65 - California Proposition 65</p> <p>0004098-71-9</p> <p>ISOPHORONE <br />DIISOCYANATE</p> <p>0.1% - 0.2%</p> <p>DSL,SARA312,VOC,TSCA</p> <p>SECTION 16) OTHER INFORMATION <br />OTHER INFORMATION <br />* There are points of differences between OSHA GHS and UN GHS. In 90% of the categories, they can be used interchangeably, but for <br />the Skin Corrosion/Irritant Category and the Specific Target Organ Toxicity (Single and Repeated Exposure) Categories. In these cases, <br />our system will say UN GHS.</p> <p>GLOSSARY <br />ACGIH- American Conference of Governmental Industrial Hygienists; ANSI- American National Standards Institute; CA Prop65- California <br />Proposition 65; Canadian TDG- Canadian Transportation of Dangerous Goods; CAS- Chemical Abstract Service; Chemtrec- Chemical <br />Transportation Emergency Center (US); CHIP- Chemical Hazard Information and Packaging; DSL- Domestic Substances List; ECEquivalent Concentration; EH40 (UK)- HSE Guidance Note EH40 Occupational Exposure Limits; EPCRA- Emergency Planning and <br />Community Right-To-Know Act; ESL- Effects screening levels; HMIS- Hazardous Material Information Service; LC- Lethal Concentration; <br />LD- Lethal Dose; NFPA- National Fire Protection Association; OEL- Occupational Exposure Limits; OSHA- Occupational Safety and <br />Health Administration, US Department of Labor; PEL- Permissible Exposure Limit; SARA (Title III)- Superfund Amendments and <br />Reauthorization Act; SARA 313- Superfund Amendments and Reauthorization Act, Section 313; SCBA- Self-Contained Breathing <br />Apparatus; STEL- Short Term Exposure Limit; TCEQ- Texas Commission on Environmental Quality; TLV- Threshold Limit Value; TSCAToxic Substances Control Act Public Law 94-469; TWA- Time Weighted Value; US DOT- US Department of Transportation; WHMISWorkplace Hazardous Materials Information System.</p> <p>DISCLAIMER <br />To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries <br />assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material <br />is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are <br />described herein, we cannot guarantee that these are the only hazards that exist. The above information pertains to this product as currently <br />formulated, and is based on the information available at this time. Addition of reducers or other additives to this product may substantially alter the <br />composition and hazards of the product. Since conditions of use are outside our control, we make no warranties, express or implied, and assume no <br />liability in connection with any use of this information.</p> <p>SDS RE-ROOF Colored Urethane Top Coat HS <br />SDS DATE: 22-DEC-28</p> <p>Page 10 of 10</p>
