SG2_Chemical_resistance_012207.pdf
1 Page
33 KB
Download
<h1>SG2_Chemical_resistance_012207.pdf</h1> <p>VAPORTIGHT COAT®-SG2 <br />CHEMICAL RESISTANCE OF VAPORTIGHT COAT®-SG2 <br />Chemical</p> <p>short term <br />Exposure</p> <p>medium - limited <br />Exposure</p> <p>high - long term <br />Exposure</p> <p>Contact duration <br /><8h <br />**)</p> <p>Contact duration <br />between <br />8 h and 72 h</p> <p>Contact duration <br />between <br />72 h and 3 Months</p> <p>Not <br />recommended</p> <p>(01/22/07)</p> <p>Acetic Acid 10% <br />• <br />Acetone <br />• <br />Alcohol (<48% Methanol) <br />• <br />Aliphatic aldehydes <br />• <br />Amines <br />• <br />Ammonia - aqueous <32% <br />• <br />Ammonium thiosulfate <10% *) <br />• <br />Aromatic esters & ketones <br />• <br />Jet Fuel <br />• <br />Benzene & benzene containing mixtures <br />• <br />Caustic soda lye <br />• <br />Chromic acid < 25% <br />• <br />Crude oil <br />• <br />Diesel <br />• <br />EDTA acid <10% *) <br />• <br />Engine oil & transmission fluid - used <br />• <br />Esters - organic <br />• <br />Ethylene glycol 100% <br />• <br />Gasoline <br />• <br />Glycerine <10% *) <br />• <br />Glycol ether <br />• <br />Halogenated hydrocarbons => C2 <br />• <br />Heating oil <br />• <br />Hydrochloric acid 37% <br />• <br />Hydrochloric acid 100% <br />• <br />Hydrofloric acid <br />• <br />Ketones <br />• <br />Lye - inorganic <br />• <br />Methanol 100% <br />• <br />Motor oil <br />• <br />Natriumhypochlorite (active chlorine content < 12%) <br />• <br />N-Methylpyrrolidone <10% *) <br />• <br />Organic acids (Carbon acids) excluding formic acid <br />• <br />Oxidizing agents like H2O2 (hydrogen peroxide) <br />• <br />Phosphoric acid < 85% <br />• <br />Salt water <br />• <br />Sodium carbonate <10%*) <br />• <br />Sodium metabisulfate <10% *) <br />• <br />Sodium sulfite <10% *) <br />• <br />Sodium thiosulfate <10% *) <br />• <br />Solutions of organic acids <10% <br />• <br />Solutions of inorganic, non oxidicing salts with pH 6 <br />• <br />Sulphuric acid < 50% <br />• <br />Note: *) = at 70oF (20oC). Chemicals coming in contact with VAPORTIGHT COAT-SG1 or SG2 can discolor SG1 or SG2 on the surface. <br />However, this does not affect the performance of SG1 or SG2. <br />**) = surface of SG1 or SG2 must be inspected after contact with listed chemical.</p> <p>AQUAFIN, Inc. <br />505 Blue Ball Rd., #160</p> <p>Elkton, MD 21921</p> <p>Phone (410) 392 - 2300</p> <p>Fax (410) 392 - 2324</p> <p>E-mail: info@aquafin.net</p> <p>http://www.aquafin.net</p> <p>TOLL FREE 1 - 866 - AQUAFIN (1-866-278-2346)</p> <p>5.1.1-5</p>
