IDENTITY: VAPORTIGHT Date prepared: Date revised:
SAFETY DATA SHEET
®
COAT -SG2
SDS No. 5.1.1.B1
JANUARY 2006
JANUARY 2019
SDS No 5.1.1.B1
Section 1 – Product Identification IDENTITY:
Product Name: Chemical Characterization:
VAPORTIGHT COAT®-SG2
EPOXY HARDENER (CORROSIVE)
AQUAFIN, INC. 505 BLUE BALL RD., NO. 160 ELKTON, MD 21921
(SDS 2 of 2)
“COMPONENT-B”
24 hr Emergency Phone: Chem-Tel Information Phone No:
info@aquafin.net
Recommended use of the chemical and restriction on use:
www.aquafin.net
(800) 255-3924 (410) 392-2300
Refer to the product technical data sheet. For industrial and professional users.
Section 2 – Hazards Identification GHS Classification: Flammable liquids, Category 4 Aspiration hazard, Category1 Skin corrosion/irritation, Category 1B Sensitization, Skin, Category 1 Eye damage, Category 1 Harmful to aquatic life, Category 3
H227: H304: H314: H317: H318: H412:
Combustible liquid. May be fatal if swallowed and enters airways Causes severe skin burns and eye damage. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long lasting effects.
GHS Label element: Hazard Pictograms GHS07
GHS08
Signal Word:
GHS05 Danger
Hazard Statements: H304: H314: H317: H318: H412: H227:
May be fatal if swallowed and enters airways Causes severe skin burns and eye damage. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long lasting effects. Combustible liquid.
Precautionary Statements: Prevention: P102: Keep out of reach of children. P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P264: Wash skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection. P281: Use protective equipment as required. Response: P301 + P315: P301 + P330 + P331:
IF SWALLOWED: Get immediate medical advice/attention. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Page 1 of 6
IDENTITY: VAPORTIGHT
P302 + P352 = P361:
IF ON SKIN:
P304 + P340:
IF INHALED:
Remove/Take off immediately all contaminated clothing. Wash with plenty of water.
P308 + P313 P332 + P313: P362:
Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF IN EYES: If exposed or concerned, get medical advice/attention. IF skin irritation occurs, get medical advice/attention. Take off contaminated clothing and wash before reuse.
Storage: P403 + P235: P405:
Store in a well-ventilated place. Keep cool. Store locked up.
Disposal: P501: P502:
Dispose of contents/container to an approved waste disposal site. Refer to manufacturer/supplier for information on recovery/recycling.
P305 + P351 + P338:
Section 3 – Composition / Information on Hazardous Ingredients Description:
Modified cycloaliphatic polyamine.
COMPONENTS 3-aminomethyl-3,5,5-trimethylcyclohexylamine Naphtha (petroleum), hydrotreated heavy 2,4,6-tris-(dimethylaminomethyl)phenol Bis(dimethylaminomethyl)phenol
CAS NUMBER 2855-13-2 64742-48-9 90-72-2 71074-89-0
WEIGHT 50-100% 25-50% 2.5-10% <2.5%
Note: There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Section 4 – First Aid Measures General Advise:
Immediately remove contaminated clothing. Exposure symptoms can appear after several hours. If contaminated, consult medical advise up to 48 hours after exposure. First Aid: Wear protective equipment (i.e. protective gloves). If victim is unconscious: position and transport in “stable sideways position” to prevent asphyxiation if vomiting. Keep air passages open, remove dentures and vomit. Control breathing and pulse. If breathing and heart activity stops, administer CPR and call immediately emergency services.
After Inhalation:
Remove subject to fresh air. Administer oxygen if difficulty with breathing. Consult a physician.
After Ingestion:
Immediately seek medical attention. Do not induce vomiting. Drink plenty of water to dilute stomach contents.
After Skin Contact:
Do not use thinners or other solvents. Instantly wash skin with plenty of soap and cold water for at least 15 minutes. Remove affected clothes instantly. Wash clothing before reuse.
After Eye Contact:
Rinse opened eye with plenty of running water for at least 15 minutes, lifting upper and lower eyelids occasionally. Remove contact lenses. Consult physician. Page 2 of 6
Section 5 – Fire Fighting Measures Auto-ignition:
Product is not self-igniting and not explosive.
Extinguishing Media:
Carbon dioxide (CO2), extinguishing powder, foam, water spray. Do not use full water jet. As in any fire, wear full protective gear and NIOSH-approved selfcontained breathing apparatus with full face-piece operated in the pressure demand or other positive pressure mode.
Special Fire Fighting Procedures:
Unusual Fire and Explosion Hazards: Bursting and explosion of container possible due to increase of pressure when exposed to increasing heat. In case of fire, cool nearby containers with water fog. Formation of poisonous gases during heating or in fires possible.
Section 6 – Accidental Release Measures Person-related Safety Precautions:
Provide plenty of fresh air. Avoid eye and skin contact. Avoid inhalation of vapors. Wear personal protective equipment. Remove or eliminate all ignition sources.
Methods for Cleaning up:
Contain and collect spillage with non-combustible, absorbent materials. I.e. sand, earth, vermiculate, diatomaceous earth, universal binders, sawdust and place in container for disposal.
Waste Disposal Method:
Dispose in accordance with local, state and federal regulations.
Ecological Information:
Do not allow product to reach ground water, bodies of water, storm water or sewage systems.
Section 7 – Handling and Storage Handling:
Avoid eye and skin contact. Keep out of reach of children.
Storage:
Store in a cool, dry enclosed area off the ground in tightly closed containers. No special measures required against explosion and fires. Store away from foodstuffs. Provide fresh air when handling in closed rooms (open windows and doors).
Section 8 – Exposure Controls / Personal Protection Engineering Controls:
Use with adequate general and local exhaust ventilation. Washing of the skin in the working area must be possible. Eye-wash station or bottle must be available.
Respiratory Protection:
Respirator in well ventilated areas not necessary. Wear a properly fitted NIOSH approved respirator in poorly ventilated areas or spillage.
Skin Protection:
When installing, wear appropriate impervious gloves (neoprene) to prevent handskin exposure. Wear appropriate impervious clothing to prevent skin exposure (long sleeve shirt and long pants).
Eye Protection:
Wear chemical splash goggles. Face shield as necessary.
Work/Hygienic Practices:
Wash hands before breaks and after work, and before eating, drinking or smoking. Know the locations of eye wash fountains and emergency showers. Page 3 of 6
Section 9 – Physical and Chemical Properties Physical State: Appearance/Color: Odor: Solubility in water: Flash Point: Flammability: Danger of explosion: Boiling Point: Melting Point: Boiling Point: Melting Point: Bulk Density: Viscosity: (dynamic) pH: Viscosity: (dynamic) VOC content:
Liquid Yellowish Amine like Not or slightly miscible o o 77 C (170 F). Product is not self-igniting Product is not explosive Not determined Not determined N/A N/A 3 o o 0.88 g/cm at 20 C (68 F) Not determined o o 14 at 20 C (68 F) o o 24 cps (mPas) at 20 C (68 F) < 50 g/l (A+B Combined)
Section 10 – Stability and Reactivity Chemical Stability:
Stable under normal conditions.
Conditions to Avoid:
Keep away from heat, sparks and ignition sources.
Hazardous Decomposition:
Carbon monoxide, carbon dioxide, hydrocarbon fragments. Possibility of flammable mixtures in the air, if product heats above flash point and/or spraying or fogging.
Incompatibilities:
Strong oxidizing agents.
Section 11 – Toxicological Information Acute Toxicity: 2855-13-2 3-aminomethyl-3,5,5-trimethylcyclohexylamine Oral LD50 1030 mg/kg (rat) Dermal LD50 1840 mg/kg (rabbit) 64742-48-9 Oral Dermal Inhalation
Naphtha (petroleum), hydrotreated heavy LD50 >2000 mg/kg (rat) LD50 >2000 mg/kg (rabbit) LC50 >5 mg/l (rat)
Primary Irritation: - Skin: - Eyes: - Sensibility: Additional Information:
corrosive on skin and mucous membrane. strong corrosive reaction. sensibility through contact with skin possible. if ingested, highly corrosive to mouth and throat, as well as danger or perforation to esophagus and stomach.
Section 12 – Ecological Information Aquatic Toxicity: 2855-13-2 3-aminomethyl-3,5,5-trimethylcyclohexylamine EC10 18 h/ 1120 mg/l (Pseudomas putida) Page 4 of 6
EC50 EC50 LC50
48 h/ 96 h/
>50 mg/l (Algae toxicity) 23 mg/l (Daphnia magna) 110 mg/l (Brachydanio rerio)
Bioaccumulative potential: No further relevant information available. Mobility in soil: No further relevant information available. Remark: Toxic for fish. Do not allow product or large quantities to reach into waterways or drains. General notes:
Water hazard class 2 (Self-assessment): hazardous for water. Do not allow product to reach ground water, bodies of water, or storm water or sewage systems.
Section 13 – Disposal Considerations Waste Disposal Method:
Dispose of in a manner consistent with federal, state and local regulations. This includes pails containing uncured material. Pails with cured/hardened remains of product can be sent for recycling.
Recommendation:
Product mixed with resin and fully cured is ecologically save and can be disposed to local refuse deposit or recycling facility.
Section 14 – Transport Information USDOT (Domestic Surface):
UN 2735 Amines, liquid, corrosive, NOS, (Isophoronediamine) 8, PG III
IATA/ICAO (Air):
UN 2735 Amines, liquid, corrosive, NOS, (Isophoronediamine) 8, PG III.
IMDG (Ocean):
UN 2735 Amines, liquid, corrosive, NOS, (Isophoronediamine), Marine pollutant, 8, PG III
Section 15 – Regulatory Information All raw materials are on the U.S., EPA, TSCA Inventory. SARA Notification:
Nothing in this product is subject to regulation under SARA 302, 313. It may be subject to SARA 312 reporting, depending upon the purchaser’s storage circumstances.
CERCLA:
No CERCLA chemicals exist in this product above reportable concentrations.
Clean Air Act Ozone-Depletion Potential:
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section (40 CFR 61).
Section 16 – Other Information (Hazard Rating:
0 = Minimal;
HMIS III rating: Health: 3* Flammability: 0
1 = Slight;
2 = Moderate;
Physical hazard: 1
Page 5 of 6
3 = Serious;
4 = Severe; * = Chronic)
Abbreviations and acronyms: USDOT: IMDG: IATA: CAS: LC50: LD50: EC50: RQ: .
United States Department of Transportation. International Maritime Code for Dangerous Goods. International Air Transport Association. Chemical Abstracts Service (Division of the American Chemical Society). Lethal concentration, 50 percent. Lethal dose, 50 percent. Median effective concentration. Reportable quantity.
SDS prepared by:
Aquafin product safety department.
DISCLAIMER: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, expressed or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use. Aquafin shall not be responsible for the use of this product in a manner to infringe on any patent or any other intellectual property rights held by others. User is responsible for determining appropriate safety measures and for applying the legislation covering his own activities. We recommend that user makes tests to determine the suitability of a product for its particular purpose prior to use. END OF SDS
Page 6 of 6
(January 22, 2019)