Liquid and powder crystalline waterproofing admixtures



    AQUAFIN-IC ADMIX is a state-of-the crystalline waterproofing admixture available in liquid and powder form. The chemistry within the AQUAFIN-IC ADMIX reacts with moisture and free lime in the concrete, creating millions of insoluble crystalline fibers, which fill the pores, capillary tracts and minor shrinkage cracks within the concrete. Passage of water through the concrete, either from the positive or negative water pressure side is permanently blocked and the reinforcement protected from corrosion. AQUAFIN-IC ADMIX can be added to the concrete mix at the time of batching or at the job site to a ready mix truck with full mixing capabilities.

    Working Principle:
  • During concrete hardening AQUAFIN-IC ADMIX forms millions of fine crystalline fibers (nanocrystals) inside the capillary pores
  • Crystalline fibers reduce the pore diameter, thus blocking the flow of water through the capillary voids
  • Treated concrete is watertight


  • Ready to use
  • Easy mixing, minimal influence on mix design
  • Resists extreme hydrostatic pressures
  • Waterproofs concrete even at high w/c ratios
  • Improves chemical and abrasion resistance
  • NSF/ANSI Standard 61 certified for contact with potable water
  • Self sealing effect up to 1/64" (0.4 mm) crack width

CSI Divisions:

  • Cast-in-Place Concrete (03 30 00)
  • Crystalline Waterproofing (07 16 16)

Complementary Products:

Item numberPackagingUnit/pallet
4ICA-16GP6 g/pail36
4ICA-124T240 g/tote1


Self-Storage Facility

Self-Storage Facility


Solids Waste Transfer Station

Solids Waste Transfer Station


Quick Product Access
Quick Division Access
Newsletteropt in