Aquafin SG2 mixing pictures 012207.pdf
1 Page
164 KB
Download
<h1>Aquafin SG2 mixing pictures 012207.pdf</h1> <p>VAPORTIGHT COAT®-SG2 <br />MIXING & APPLICATION SEQUENCE <br />VAPORTIGHT COAT®-SG2 is supplied in a 2.1 gal kit</p> <p>1. Cut plastic seal and remove <br />safety metal ring.</p> <p>2. Pierce a hole through the <br />top (rubber membrane) <br />and the bottom of Part B.</p> <p>5. Pour mixed material into a <br />clean container.</p> <p>8. Carefully scrub SG2 into the pores <br />with a long handled broom or <br />scrub brush.</p> <p>3. Completely drain Part B <br />(hardener) into <br />Part A (resin).</p> <p>6. Carefully mix once more for <br />approx. 30 seconds.</p> <p>9. Follow with a roller to achieve a <br />uniform coverage.</p> <p>4. Mix for approx. 5 minutes. <br />Use complete kit in the <br />proportions supplied. <br />(Do not alter proportions.)</p> <p>7. Pour appropriate amount of <br />material onto slab and spread <br />evenly with a roller or squeegee.</p> <p>10. Immediately broadcast sand to <br />rejection (full broadcast) on top <br />of fresh SG2.</p>
